Wheel Studs
Wheel Studs 
Honestly, I would go with the 3.5" studs. Here's a little write up that I did a little while back. Has a picture of the 3.5" studs vs the stockers. https://ls1tech.com/forums/showthrea...837&highlight=
You don't want to mess with busting off studs. Here's a good friend of mine ripping off the studs that come with an aftermarket 12 bolt...
http://youtube.com/watch?v=Uwms7Oiull4
You don't want to mess with busting off studs. Here's a good friend of mine ripping off the studs that come with an aftermarket 12 bolt...
http://youtube.com/watch?v=Uwms7Oiull4
I had a set of the studs that came on my moser axles sheer off while I was going down the highway. I got it off to the side before the wheel shot off.
I have 3" ARP's. I would go with a 3.5"s next time around.
I have 3" ARP's. I would go with a 3.5"s next time around.
i have 2.5" arp's on my fronts and i think im going to get 2.5" for the rear
with the spacer in the front the studs stick out past the rim like 5mm (guess) legally its suppose to be 12mm, i might get 3" for the front and put the 2.5" in the rear. i havent decieded yet........ btw i have the same wheel setup as u
i can show u sometime if ur up at ned or if im ever down at noyzee's or something
with the spacer in the front the studs stick out past the rim like 5mm (guess) legally its suppose to be 12mm, i might get 3" for the front and put the 2.5" in the rear. i havent decieded yet........ btw i have the same wheel setup as u
i can show u sometime if ur up at ned or if im ever down at noyzee's or something
i have 2.5" arp's on my fronts and i think im going to get 2.5" for the rear
with the spacer in the front the studs stick out past the rim like 5mm (guess) legally its suppose to be 12mm, i might get 3" for the front and put the 2.5" in the rear. i havent decieded yet........ btw i have the same wheel setup as u
i can show u sometime if ur up at ned or if im ever down at noyzee's or something
with the spacer in the front the studs stick out past the rim like 5mm (guess) legally its suppose to be 12mm, i might get 3" for the front and put the 2.5" in the rear. i havent decieded yet........ btw i have the same wheel setup as u
i can show u sometime if ur up at ned or if im ever down at noyzee's or something
stud length? i didnt think so, maybe but im pretty sure they are the same. just the brakes are different. i will show u in person sometime if i ever see u at the track or if i ever get back down to noyzee's
