Nine bar info needed please-Experts only, no guessing
#1
6 & 8 Second Club
Thread Starter
Join Date: Aug 2006
Location: Illinois, RT 66 dragway area
Posts: 2,284
Likes: 0
Received 0 Likes
on
0 Posts
Nine bar info needed please-Experts only, no guessing
.
Have to add a nine bar to a car. Need to know what the exact location specs are. How far in front of existing bar is it needed.
I heard it's 1 1/4" @ .058 minimum?? Was thinking of adding 2 bars, one where required, & one more about where knees are.
Safety is more important than weight. Any info or thoughts, would sure help. Thanks guys.
.
Have to add a nine bar to a car. Need to know what the exact location specs are. How far in front of existing bar is it needed.
I heard it's 1 1/4" @ .058 minimum?? Was thinking of adding 2 bars, one where required, & one more about where knees are.
Safety is more important than weight. Any info or thoughts, would sure help. Thanks guys.
.
#4
6 & 8 Second Club
Thread Starter
Join Date: Aug 2006
Location: Illinois, RT 66 dragway area
Posts: 2,284
Likes: 0
Received 0 Likes
on
0 Posts
.
The tech guy said to call it a "Nine Bar" & most chassis guys would know what I needed.
It's for under your legs on a 6.00, 25-1E car. The car has the kidney bar. Nobody caught the nine bar missing.
The damn thing got certed every year, Pro sticker & no one said anything until now. New NHRA guy in Chicago.
It just came out of chassis shop, but I had no idea what it was, or it was missing. I would have had them do it.
Don't want to order wrong material & weld in wrong place. I have a TIG & can hand fit one bar.
Really don't need to buy specs for one bar. The car is done & racing. Any info you have, would help a ton.
Thanks Madman.
.
The tech guy said to call it a "Nine Bar" & most chassis guys would know what I needed.
It's for under your legs on a 6.00, 25-1E car. The car has the kidney bar. Nobody caught the nine bar missing.
The damn thing got certed every year, Pro sticker & no one said anything until now. New NHRA guy in Chicago.
It just came out of chassis shop, but I had no idea what it was, or it was missing. I would have had them do it.
Don't want to order wrong material & weld in wrong place. I have a TIG & can hand fit one bar.
Really don't need to buy specs for one bar. The car is done & racing. Any info you have, would help a ton.
Thanks Madman.
.
#6
6 & 8 Second Club
Thread Starter
Join Date: Aug 2006
Location: Illinois, RT 66 dragway area
Posts: 2,284
Likes: 0
Received 0 Likes
on
0 Posts
.
Email sent, thanks Madman.
My seat is not mounted to the floor. It's a cage with a piece of alum sheet metal.
My thought was to put 2 bars (actually 4, 1 bar on each side of diagonal) equally spaced from the back horizontal
(bar on jackstand) to the front horizontal. I have no idea if there is a exact location required from that back bar??
Thanks again.
.
Email sent, thanks Madman.
My seat is not mounted to the floor. It's a cage with a piece of alum sheet metal.
My thought was to put 2 bars (actually 4, 1 bar on each side of diagonal) equally spaced from the back horizontal
(bar on jackstand) to the front horizontal. I have no idea if there is a exact location required from that back bar??
Thanks again.
.