KGSloan

so far i've only run it once. it was with the stock clutch, 3000' DA. the car is also near full weight. it ran the times in the sig short shifting it at 6500. i believe jason at thunder has run some pretty good times with this cam as well. it is an excelent stip cam. it makes a great torque curve compared to other big cams without sacrificing peak horsepower.

99 TA

iTrader: (1)

Well I'm not really a die hard drag racer but I go 2 or 3 times a year. I dynoed 437 RWHP and 401 RWTQ with Absolute Speed 5.3 heads, TR 230, and all of the normal bolt ons. I have a 8.8" rear with 4.10's, BMR LCA's, BMR sway bars, SLP subfram connectors, and stock springs and shocks. I have run a hand full of 11.3's and a ton of 11.4's at 120-121 pulling a 1.5 60'. On street tires I run 11.7's @ 122-123. Over all I love this cam both on and off the street. I was also able to pull the front wheels so I think there is enough torque. Oh and it's a M6.

Wease

And this guy can't drive for ****!

Seriously, dyno numbers don't mean dick. I only put down 383/383 and still ran a 12.0 @ 116. Had I not broken my rear, I'm certain I would have ran an 11 that day...