|2ocky

I had my car dynoed yesterday, 3 pulls were done. On the way home my ABS INOP light was on. I unhooked the battery for a few hours then hooked it back up and the light is still on. Does anybody know what causes this? The car is an 01 z28 6 speed without traction control.

bore.me

iTrader: (15)

slam on the brakes on some loose gravel (safely) and let us know if your ABS works or if your tires lock up. Did you change front or rear tire size?

|2ocky

I'll check to see if it works tommorrow. I have 275 35 18s on the front and 295 35 18s on the rear, have had them on for close to 2 years with no problem.

litle88

iTrader: (20)

Also check to see if your sensor didnt pop out a little, sometimes after they take the straps off the rear axle tubes the wiring will get snagged and get caught when they pull them. It happened to me!!

Slowhawk

iTrader: (12)

The straps probly pulled the wires going to the bulk head on the car.(the plug infront of the rear,driver side)

|2ocky

thanks for the replies, ill check that too

|2ocky

That was the problem, straps pulled the plug out.

litle88

iTrader: (20)

awesome!