Dyno Results
11-05-2009, 05:17 PM
#1
Staging Lane
Thread Starter
Join Date: Oct 2009
Location: Highlands, Tx.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
Dyno Results PRC stage 2.5 5.3L heads, Torquer V2 Cam, PS L/T, ORY, LS6 Intake, 36Lb Fast injectors & Underdrive pulley.
Stock bottom end with 133,000 miles.
408HP 380TQ
I was wishing for more. But the tired bottom end is still pretty strong.
What do you guys think?
Stock bottom end with 133,000 miles.
408HP 380TQ
I was wishing for more. But the tired bottom end is still pretty strong.
What do you guys think?
11-05-2009, 06:35 PM
#4
TECH Apprentice
iTrader: (8)
Join Date: Jun 2008
Location: somerset WI
Posts: 355
Likes: 0
Received 0 Likes
on
0 Posts
I have the same setup in a auto.... are you a stick or a auto?
It looks about right my setup made 376 HP and 358 TQ through a 3600 stall. I think my numbers have came up a bit because my TB was not opening all the way and the motor only had about 30 min of rin time before the dyno.
It looks about right my setup made 376 HP and 358 TQ through a 3600 stall. I think my numbers have came up a bit because my TB was not opening all the way and the motor only had about 30 min of rin time before the dyno.
11-05-2009, 07:03 PM
#5
Staging Lane
Thread Starter
Join Date: Oct 2009
Location: Highlands, Tx.
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
It is a 6 speed.
I am thinking about taking it to Houston Raceway tomorrow night to see what it will do. Street tires though, Nitto 555's.
By the way thanks to Chuck at Houston Performance for tuning it.
I am thinking about taking it to Houston Raceway tomorrow night to see what it will do. Street tires though, Nitto 555's.
By the way thanks to Chuck at Houston Performance for tuning it.
11-05-2009, 10:22 PM
#6
results are a little lower than i would have expected. However your old motor and fuel system may be a little tired. Are you maxing out your fuel system?
Trending Topics
11-08-2009, 11:42 AM
#10
