Results after just a header+ory and ssra
#1
Results after just a header+ory and ssra
Got my car dynoed on a dynojet last jan. I had all mods in my sig minus the headers,ory,and ssra ( I know the ssra shouldnt matter) Anyway,it put down 316 rwh and 333 rwt on the dynojet corrected.
Now,I just had it dynoed 30 min ago on a dyno dynamics dyno which is suposed to be a lower reading dyno than the dynojet and mustang dyno.
Temp was 87.6f humidity was 33%. After just addition of lts+ory and ssra....
It put down 337.1 rwh and 342 rwt corrected. The top sheet is best pull.The bottom sheet is all 3 runs.
Now,I just had it dynoed 30 min ago on a dyno dynamics dyno which is suposed to be a lower reading dyno than the dynojet and mustang dyno.
Temp was 87.6f humidity was 33%. After just addition of lts+ory and ssra....
It put down 337.1 rwh and 342 rwt corrected. The top sheet is best pull.The bottom sheet is all 3 runs.
Last edited by senicalj4579; 10-18-2010 at 07:29 AM.
#6
I have same mods as you basically with the addition of a cutout, guess Im just 5hp more maybe even since I have the stock LS1 intake... Good to know where my car could be.
#7
I was shocked at the numbers because he told me this Dyno Dynamics Dyno reads lower than a mustang dyno which reads lower than dynojet. I was expecting to walk away disapointed. But Im happy with it. I wonder how much maybe left on the table seeing how it wasnt tuned after the headers+ory? Probly not much but still would be nice to have it.
Trending Topics
#10
TECH Enthusiast
iTrader: (2)
Join Date: Mar 2010
Location: Glendale
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
whats a dyno dynamic, is it like a dyno pack? if so i pull higher on a dyno pack then on a the dynojet i usually go to. The tune for your car will make a nice difference especially now you have those mods taken care of.
#16
TECH Apprentice
Join Date: May 2008
Location: Charlotte,NC
Posts: 351
Likes: 0
Received 0 Likes
on
0 Posts
I was shocked at the numbers because he told me this Dyno Dynamics Dyno reads lower than a mustang dyno which reads lower than dynojet. I was expecting to walk away disapointed. But Im happy with it. I wonder how much maybe left on the table seeing how it wasnt tuned after the headers+ory? Probly not much but still would be nice to have it.
#18
Technically Dyno Dynamics do read lower but so many shops mess with the calibrations these days to get "Dynojet" style numbers(or more). Not saying this is the case here but I've seen it happen. The closest DD around here has the "fresh out the box" calibrations and that thing is a bit of a ****. 306 whp in a 02 4.6 with an exhaust+100 shot lol.
Yup I hear ya. The guy that did the dyno specificaly told me that this dd would read lower than djet and mustang. So I dont think we would have messed with the caliberation and said somethin like that but who knows.
#20
TECH Fanatic
iTrader: (17)
Join Date: Sep 2006
Location: dayton ohio
Posts: 1,638
Likes: 0
Received 0 Likes
on
0 Posts
on a dynojet i put down 430 rwhp on a dyno dynamics I put down 395..I'm an A4..Hope this helps..You can make read or put down "dyno jet numbers" but when you do its normally higher..I did not bother when I was on one though..To me a dyno is a tool