Megadeath Cam Only
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
Megadeath Cam Only hey guys just got my cam megadeath cam package from hpe installed and thought id throw some numbers up, only other mods to the car is TSP headers and Y pipe. These numbers are on a 2002 camaro ss M6 on a 98 degree day.
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
yea ive got some un-tuned clips, http://www.youtube.com/watch?v=pCzaeAdsMxg
ill get some tuned clips tomorrow, actually is very street able... 3.73's would be a nice addition for city driving but thats about it.
ill get some tuned clips tomorrow, actually is very street able... 3.73's would be a nice addition for city driving but thats about it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
I'm not sure the exact clearance but u can't run stock casting heads with over sized valves. U have to run trick flows or any head with 13 degree rocker seats and so on as long as it's let than the oem 15 degree.
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
Yea I think that's what I'll do. It worked well doing all the cam related stuff at once with the new clutch and flywheel. I think your right, I would like to see somewhere near 500 with stock cubes? And I've been seeing some stuff one these per-induction 215s.... Are they worth the hype? Pros or cons vs the trick flows?
Good numbers for a cam only car. Congrats.
I believe the PI heads are made by the same guy who used to do the ETP heads, so they are BIG $$ but flow insane (both in volume and in velocity).
I believe the PI heads are made by the same guy who used to do the ETP heads, so they are BIG $$ but flow insane (both in volume and in velocity).
Yea I think that's what I'll do. It worked well doing all the cam related stuff at once with the new clutch and flywheel. I think your right, I would like to see somewhere near 500 with stock cubes? And I've been seeing some stuff one these per-induction 215s.... Are they worth the hype? Pros or cons vs the trick flows?
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
Yea they are the same people basically. They are only 500 more than trick flows so If they are that much better than trick flows I don't see why to skimp when your already spending 2350 anyway.....
Thread Starter
Staging Lane
Joined: Feb 2010
Posts: 65
Likes: 0
yea i bet haha thats alot of dough! i bet its harder to find 3 guys with 2 grand + to spend on heads at the same time! Well unfortunately it will be probly next summer before heads are done (college...... hmmm, student loan for heads maybe? haha). I have to say tho that i have to give some credit to chris out here in kansas @ WichitaDyno for the tune. I know theres been some guys on here from my area that say he's not very good, well..... you've seen the graph! That car made the EXACT same power pass after pass in super hot and humid weather and is %100 streetable so he must being doing something right!
And Thanks for all your time on the phone yesterday philip you were a great help, its really cool to be able to talk to all you shop owners and workers and not feel as if were bothering you when were not sure what direction to turn. Prop to all you guys!
And Thanks for all your time on the phone yesterday philip you were a great help, its really cool to be able to talk to all you shop owners and workers and not feel as if were bothering you when were not sure what direction to turn. Prop to all you guys!