383 ls1 miata a4 dyno tuned
#1
TECH Apprentice
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: york pa
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
383 ls1 miata a4 dyno tuned
1995 miata 383 ls1, 11.5-1 compression, cam is a 240-244 on 113 with around 610 lift, fast 102/102 texas speed stage 2.5 ls6 heads, headers are only 1 5/8 block huggers they feed in to 2.5 dual exhaust out the back, also has a under drive pully with no ac or ps
Transmission is a 4l60e with a tci 3500 stall rearend has 3.55 gears with a 275-50-15 drag radial
So it made 430whp and 400 tq
Transmission is a 4l60e with a tci 3500 stall rearend has 3.55 gears with a 275-50-15 drag radial
So it made 430whp and 400 tq
Trending Topics
#9
On The Tree
iTrader: (1)
Join Date: Oct 2008
Location: ca
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
? im lost, the numbers are low, its not an opinion. specially with the fast combo you have.
im a 346 with basic bolt ons a 243`s and a tv2 and have 410whp/370tq.
Im thinking you should be in mid to high 400`s....hmmm????
im a 346 with basic bolt ons a 243`s and a tv2 and have 410whp/370tq.
Im thinking you should be in mid to high 400`s....hmmm????
#12
LS1TECH & Trucks Sponsor
iTrader: (4)
For an unlocked converter and the exhaust I think those are some pretty awesome numbers. I bet locking the converter would put you over 450rwhp and in a little miata I bet that thing is a blast to drive. This car is definately not going to be a dyno queen but it should run pretty hard at the track.
People claiming low numbers obviously have not read the thread.
People claiming low numbers obviously have not read the thread.
#14
TECH Apprentice
Thread Starter
iTrader: (9)
Join Date: Jan 2007
Location: york pa
Posts: 354
Likes: 0
Received 0 Likes
on
0 Posts
Wish i could get some 1-7/8 headers for it the 1-5/8 got to be holding it back some. Ran the car couple weeks ago it want 10.47 at 130 with a 1.5 60 foot only made 2 runs