Hotcam dyno #'s inside
Thread Starter
TECH Regular
Joined: Nov 2001
Posts: 450
Likes: 0
From: Texas
Hotcam dyno #'s inside First off I want to thank Sean at MMT for everything he done for us yesterday. He took the time to get everything right on the car and was in no hurry to rush us out and get someone else in. He stayed late and made the 3 hour drive worth it, if you ever need any work done he is the man. That being said here are the #'s
Max Power 373.6
Max torque 379.5
These #'s are on a stock unported TB, no free ram air, EGR!, I will be doing these few things soon and shooting for 380 rwhp. AF was flat as a board running 12.9-13.1 from 2.5K-6.5k RPM
Max Power 373.6
Max torque 379.5
These #'s are on a stock unported TB, no free ram air, EGR!, I will be doing these few things soon and shooting for 380 rwhp. AF was flat as a board running 12.9-13.1 from 2.5K-6.5k RPM
TECH Fanatic
Joined: Nov 2001
Posts: 1,695
Likes: 9
From: Raleigh, NC
Originally Posted by Steve98Z
First off I want to thank Sean at MMT for everything he done for us yesterday. He took the time to get everything right on the car and was in no hurry to rush us out and get someone else in. He stayed late and made the 3 hour drive worth it, if you ever need any work done he is the man. That being said here are the #'s
Max Power 373.6
Max torque 379.5
These #'s are on a stock unported TB, no free ram air, EGR!, I will be doing these few things soon and shooting for 380 rwhp. AF was flat as a board running 12.9-13.1 from 2.5K-6.5k RPM
Max Power 373.6
Max torque 379.5
These #'s are on a stock unported TB, no free ram air, EGR!, I will be doing these few things soon and shooting for 380 rwhp. AF was flat as a board running 12.9-13.1 from 2.5K-6.5k RPM
Stock LS1 intake?
TECH Resident
Joined: Apr 2003
Posts: 791
Likes: 0
From: Tulsa, Ok
those are great numbers from that cam 
you're making great horsepower AND torque all while being very easy on the springs. that a nice set up. do you have an underdrive pulley? if not, with an asp, ls6 intake, and a ported tb you could be over 390rwhp 
. now, go have some fun with your ride 
you're making great horsepower AND torque all while being very easy on the springs. that a nice set up. do you have an underdrive pulley? if not, with an asp, ls6 intake, and a ported tb you could be over 390rwhp . now, go have some fun with your ride 
Nice numbers, I put down 360 rwhp with my Hotcam on a fresh one week old LS1 motor with a bad MAF on a stock tune. It was through SLP LT's with cats and full exhaust. I'm looking for similar #'s as you when I get my car back together this week, Hopefully everything will be "right" this time.
Steve
Steve
