Wildside

iTrader: (21)

while had to but this up i never post here but thought you guys would want to her about this. the car is a 2000 A4 SS i have had the car for about three years at my shop with no motor in it. i was working on it for a customer and i guess he never could get his money right so i bought it off of him for a good price so i could flip a little money and give some one a solid running car. i took a 02 32 k 100% stock 5.7 ls. fast 90 nick 90 ported by me pace long tubs slp lid stock maf asp under drive eps custom cam stock 98 injector performabuit tranny like new with a 4000 ss yank geoff did all tuning car was running out of injector with a 13.8 afr unlock 397 hp and 371.94 lockup 429.28 and 408.83 that is one mean *** cam. took the car to the track the next night and run 11.2 at 123 spinning a little with a 1.55 short time full race wight.

TXZ28LS1

iTrader: (5)

what are the specs on the cam?

reeperz28

iTrader: (1)

That's stout as hell sounds like an awesome buy !

Latch

iTrader: (8)

Hard to read without any punctuation, but from what I could get out of it, those are some strong numbers... x2 for the specs!

blocc monster

wat size cam do u have? that time is good h&c numbers. is the car gutted?

HWI

iTrader: (2)

Try using commas, they are awesome.

98blueSScamaro

iTrader: (14)

you got a solid 10.xx cam only car very nice setup

Geoff is the man

Rob

LilJayV10

iTrader: (39)

Hard to argue with an 11.2 run. Nice.

RADEoN

iTrader: (12)

jeez that's the longest run on sentence i've ever read. anyone care to make any sense out of it for me?

LilJayV10

iTrader: (39)

The man had a stock LS1, put some pacesetters, FAST 90/90, lid, UD pulley, stall and a cam on.

Ran 11.20's@123mph

RJB01camaross

Very nice results!! Get some bigger injectors so you can richen up the A/F to 12.9-13.1

Wildside

iTrader: (21)

Well guys me and Geoff keeping this one under r hat right now. I will tell u that it is in the 230s. The car is full race wight the only thing I done is but one of my sets of front runners on. It has got a lot more in it with some gear and some tires

dre2013

iTrader: (7)

damn, nice numbers! cant wait to get my eps cammed 6.0 running!!

thunderstruck507

iTrader: (18)

First I've heard of EPS keeping cam secrets.

*rolls eyes*

Well nice numbers I guess...

BORN2FLY

iTrader: (76)

HAHAHA... I betcha I know the secret specs and It's going to cost you $23k cash for me not to tell everybody!!!

Guy's I happen to witness the car on the dyno and make some passes at the FinshLine Dragway. Honestly, it has no hidden ringers and has just a few cheap handmydown parts on it that just so happened to mate nicely with the EPS cam!!!

ryany

iTrader: (15)

Well them ''handmydown'' parts is working good.

99'CajunFirehawk157

iTrader: (57)

OP: Where do you live and what kind of shop do you have?

BORN2FLY

iTrader: (76)

He lives in Prentiss, MS (near Hattiesburg)

Geoff

iTrader: (3)

The cam was custom spec'd for Josh. I'm not keeping any secrets, but this cam belongs to Josh. If he doesn't want to let the cat out of the bag that is his business.

*02WS6TURK*

iTrader: (13)

Once again another solid EPS set up. Nice results. Would like to know the specs on the cam but understand if not