help dyno day was dissapointing whats wrong
#22
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: Bishop,Texas
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok guys I am the tuner. Let me try and shed some light on this situation. We dyno'd the car again today and with the new fuel pump. I will get to that in just a sec.
The original dyno was actually a Dyno Day and the owner of the shop holding the dyno day was kind enough to let me do some tuning on the Original posters car. The car made Low power and was actually quite dissapointing. The af's were in the 14s at the topend and Despite commanding more fuel the pump was not giving it. It was the original 98 pump and the injector duty cycle was 92% and rising. This was with 27 deg of timing.
The Owner installed a Racetronix pump with rewire and we took the car back to the Same dyno today. Had the Owner install TR6 plugs. At first it only made 288 with 11.1 AF (due to the new pump acutally putting out, Injector Duty dropped to 76%) and 27 degrees of timing.......with 12.7 afs (injector Duty 67%) and 29.5 Degrees of timing Car made 303 hp unlocked. There is a problem somewhere on the car and we are working to track it down. We did not do any of the work on the car and are going to be preforming a compression test asap to see what results we have.
Just got done tuning a 98 A4 car with the Same basic setup. Torquer V2 Cam, PRC Dual Springs on PRC 5.3 Stage 2 heads and Longtubes. Car made 412/423 Locked.
The original dyno was actually a Dyno Day and the owner of the shop holding the dyno day was kind enough to let me do some tuning on the Original posters car. The car made Low power and was actually quite dissapointing. The af's were in the 14s at the topend and Despite commanding more fuel the pump was not giving it. It was the original 98 pump and the injector duty cycle was 92% and rising. This was with 27 deg of timing.
The Owner installed a Racetronix pump with rewire and we took the car back to the Same dyno today. Had the Owner install TR6 plugs. At first it only made 288 with 11.1 AF (due to the new pump acutally putting out, Injector Duty dropped to 76%) and 27 degrees of timing.......with 12.7 afs (injector Duty 67%) and 29.5 Degrees of timing Car made 303 hp unlocked. There is a problem somewhere on the car and we are working to track it down. We did not do any of the work on the car and are going to be preforming a compression test asap to see what results we have.
Just got done tuning a 98 A4 car with the Same basic setup. Torquer V2 Cam, PRC Dual Springs on PRC 5.3 Stage 2 heads and Longtubes. Car made 412/423 Locked.
#23
10 Second Club
iTrader: (4)
Join Date: Oct 2006
Location: Bishop,Texas
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Original poster just told me he did a compression test and all the cylinders ranged from 122-129. Very low. So there is a big problem somewhere or the motor is a low compression motor. But we are going to try our best to help him figure it out
#24
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Sounds like the intake centerline is really retarded giving it very low dynamic compression. Timing marks could be off one tooth from dot to dot.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
#26
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
thanx rick for repling and shedding some light on my situation.well the timing gear dots where linrd up and checked over atleast 3-4 times before puting timing cover on i no for sure its right ,even had a freind here as i was doing it and he agreed that it was right.well 1 thing im thinking is i didnt lap the valves.my heads and valves r new stage 2.5 5.3 heads.they came disassembled cuz i already had my springs. so will be checking some things tomorrow.thanx to everyone for replies and advice .