New cam only dyno numbers
also by looking at your 1/8th mile it looks so close to mine. with the power your making you should be a little higher, like 102ish try shifting high after you redyno. see how long she hold power. and shift where she first starts to fall off. also log a pass looks like your car is also like mine in the aspect of its not really getting in its power band till half track. due to getting off the line slugish.
Thread Starter
TECH Senior Member
iTrader: (28)
Joined: Nov 2005
Posts: 5,556
Likes: 6
From: Rochester, NY
it was 2995 on the indy scales after all motor passes. with stock front brakes, lower/upper A arms,spindles, PS.
Its lighter now with the burkhart stuff, and drag front brakes. But I need to add weight to be 3050 for all motor at MIR. I haven't ran DS2 all year those are about 20 lighter then the Nexen radials I'm running now.
Its lighter now with the burkhart stuff, and drag front brakes. But I need to add weight to be 3050 for all motor at MIR. I haven't ran DS2 all year those are about 20 lighter then the Nexen radials I'm running now.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Thread Starter
TECH Senior Member
iTrader: (28)
Joined: Nov 2005
Posts: 5,556
Likes: 6
From: Rochester, NY
ugg. I see it now the whole.... stock with a cam ONLY guy. And coming form somone with a 1978 Caprice with a 6.0L and a 23X/24x cam running 12's with "cam only" sig W T F is this ****????
I have mods (listed) WITH a cam on my cars stock LS1. I don't need to put I dont have the stock plugs anymore, or the stock oil the motor came with too. common'
I have mods (listed) WITH a cam on my cars stock LS1. I don't need to put I dont have the stock plugs anymore, or the stock oil the motor came with too. common'
Thread Starter
TECH Senior Member
iTrader: (28)
Joined: Nov 2005
Posts: 5,556
Likes: 6
From: Rochester, NY
I only made a few passes at Indy it did do that 30mph backhalf in that lane, but thats not normal. There trimmers were different or something, in NY and MIR is always been 10x in the 1/8th and never had a +30 beofre I can think of. The trans needs to be freshened so I had to shift slow, the more shifts in the front half add up. The shifting as sucked all year.
Thread Starter
TECH Senior Member
iTrader: (28)
Joined: Nov 2005
Posts: 5,556
Likes: 6
From: Rochester, NY
I got it now, you have a 1978 Caprice, with a junkyard Lq9 longblock, a different GM intake, TB, accessories, Cam only setup.
But I'm lying about having a cam only setup for putting a fast intake on.
But I'm lying about having a cam only setup for putting a fast intake on.
Want to know what annoys me? When people try to correct someone who is right, by trying to sound smart on the Internet, when they're wrong. Studderin isn't lying about anything on his car. I've seen him race at the local tracks and his car progressing with the mods first hand. Learn what a "cam only" setup means before you just go calling someone a liar.
To anyone outside the group, it could mean a lot of things. Only people who have active exposure to and/or participation in the group knows what others are referring to when they use the term.
Why not address the situation by putting it forth as a question for clarity instead of accusing somebody of deliberately misleading people?