Dyno Smoke

Reply Subscribe

Thread Tools

Search this Thread

Dec 29, 2012 | 07:06 AM

badmonza

Thread Starter

Teching In

Joined: Nov 2012

Posts: 47

Likes: 3

From: Southwest Louisiana

Dyno Smoke

Had car put on dyno and smoked at top rpm and when let off. Heard pcv systems suck on these cars, so I checked it out. No pcv valve in line before entering intake at all. My question is if I just install a catch can will it stop this without the pcv valve? Thanks

Dec 29, 2012 | 08:42 AM

burbalanche

Launching!

iTrader: (3)

Joined: Jun 2011

Posts: 260

Likes: 0

yes it should help at the least.put a catch can and run a line from each valve cover to it.that is not a good crankcase evac but will help at the least.i had mine setup like that and had no problems.

Dec 30, 2012 | 07:35 AM

dr_whigham

The Scammer Hammer

iTrader: (49)

Joined: Apr 2009

Posts: 6,717

Likes: 24

From: Lafayette, LA

Mine did it too at the tip-top of the pull, and when he let off. I have an 04+ LS6 valley as well as a Norris catch can. Mine wasn't very bad though.

Dec 31, 2012 | 07:37 PM

JRENIGAR

10 Second Club

iTrader: (37)

Joined: Dec 2010

Posts: 2,069

Likes: 2

From: 72396

Mine threw a good lil puff at the end of each pull on the dyno. That was 10k miles ago when the blower went on. It turned 140k the other day on the stock longblock. Dont worry, just dont over rev it...

Last edited by JRENIGAR; Jan 18, 2013 at 10:34 AM.