Track times and dyno
Thread Starter
Staging Lane
Joined: Sep 2014
Posts: 62
Likes: 0
Track times and dyno I got a 02 trans am Ls1 cam only besides headers,lid, 3600 yank, stock 3.23 gears. I went 12.34 at the track is that good or bad with the mods I have ? It's a 232/239 .595/.605 and the car made 375 on the dyno? Does that seem low?
Then your numbers are fine.
At minimum we need to know: 60ft, MPH, density altitude
Also helpful: shift RPM, vehicle weight, and details of the tune (air fuel ratio and timing being most key)
You say cam only besides headers and lid. Does that mean stock cats and stock muffler?
At minimum we need to know: 60ft, MPH, density altitude
Also helpful: shift RPM, vehicle weight, and details of the tune (air fuel ratio and timing being most key)
You say cam only besides headers and lid. Does that mean stock cats and stock muffler?
Thread Starter
Staging Lane
Joined: Sep 2014
Posts: 62
Likes: 0
No cats and stock muffler but a cut out right after the Y-pipe, it's a full weight car , shifts at 6700, I think I was mph around 117 and I'm in New Orleans area so I'm low low on altitude and I don't know to much about the AFR and timing
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo