Dynamometer Results & Comparisons Dyno Records | Dyno Discussion | Dyno Wars

Is 10.99 possible with this setup???

Thread Tools
 
Search this Thread
 
Old Jun 29, 2015 | 08:31 AM
  #1  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default Is 10.99 possible with this setup???

Any guesses on hp numbers and 1/4 mile times would be greatly appreciated.

All aluminum re-sleeved 408

11:0:1 compression

JE pistons

All forged internals not sure on brand

Dart pro 1 fully cnc 67.5cc chamber

Efi system is holley 102mm tb 102 intake both ported

Cam 238/242 113 lsa

Ls7 lifters

Th350 trans 3600 stall

Original 8.5 inch 10 bolt rear end. no suspension upgrades. That is coming next year.

Kooks longtube 1-7/8 headers through 3 inch tru dual h pipe.

Dynomax mufflers.

All bolts and studs arp.

93 octane

MT et streets

Wheels are billet specialties street lites.
Reply
Old Jun 29, 2015 | 09:31 AM
  #2  
tigertales's Avatar
12 Second Club
 
Joined: Sep 2006
Posts: 182
Likes: 0
Default

What's the weight? Where's the track?

Should be doable.
Reply
Old Jun 29, 2015 | 09:35 AM
  #3  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by tigertales
What's the weight? Where's the track?

Should be doable.
Great lakes race track I'm union Grove Wisconsin. It's an 86 cutlass 442 original curb weight is 3250. I have the billet street lites and the all aluminum engine. That should put it around 3100lb. I'm 250 so let's say 3400lb.
Reply
Old Jun 29, 2015 | 09:40 AM
  #4  
z28SSilvest's Avatar
11 Second Club
 
Joined: Aug 2012
Posts: 730
Likes: 0
From: Middletown, DE
Default

Sounds right to me.. you'll never know until you build it and run it
Reply
Old Jun 29, 2015 | 09:45 AM
  #5  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by z28SSilvest
Sounds right to me.. you'll never know until you build it and run it
Engine should be done at the shop any day now
Reply
Old Jun 29, 2015 | 09:49 AM
  #6  
z28SSilvest's Avatar
11 Second Club
 
Joined: Aug 2012
Posts: 730
Likes: 0
From: Middletown, DE
Default

Originally Posted by LS_86Cut442
Engine should be done at the shop any day now
For HP numbers I'm going to guess anywhere from 480 - 520 lol cars are all different. 10 bolt doesn't really take away a lot of power.
Reply
Old Jun 29, 2015 | 09:53 AM
  #7  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by z28SSilvest
For HP numbers I'm going to guess anywhere from 480 - 520 lol cars are all different. 10 bolt doesn't really take away a lot of power.
All these estimates are making me really excited to get this project completed. Haha
Reply
Old Jun 29, 2015 | 10:11 AM
  #8  
z28SSilvest's Avatar
11 Second Club
 
Joined: Aug 2012
Posts: 730
Likes: 0
From: Middletown, DE
Default

Originally Posted by LS_86Cut442
All these estimates are making me really excited to get this project completed. Haha
Keep us updated
Reply
LS1 Tech Stories

The Best V8 Stories One Small Block at Time

story-0

Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

 Verdad Gallardo
story-1

6 Common C5 Corvette Failures and What's Involved In Repairing Them

 Pouria Savadkouei
story-2

Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

 Verdad Gallardo
story-3

Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

 Pouria Savadkouei
story-4

Top 10 Most Powerful Chevy Trucks Ever Made!

 
story-5

Hennessey's New Supercharged Silverado ZR2 Has 700 HP

 Verdad Gallardo
story-6

Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

 Verdad Gallardo
story-7

Awesome K5 Blazer Restomod Comes With C7 Corvette Power

 Verdad Gallardo
story-8

10 Camaros You Should Never Buy

 
story-9

10 LS Engine Myths That Refuse to Die

 Verdad Gallardo
Old Jun 29, 2015 | 10:31 AM
  #9  
HCI2000SS's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Aug 2012
Posts: 11,137
Likes: 20
From: Howell & Fenton MI
Default

Should be very doable if you hook good
Reply
Old Jun 29, 2015 | 10:39 AM
  #10  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Just got off the phone with the builder and he said it should be done by next week. Fingers are crossed!
Reply
Old Jun 29, 2015 | 09:51 PM
  #11  
blackLS1m6's Avatar
TECH Apprentice
iTrader: (14)
 
Joined: Jul 2008
Posts: 301
Likes: 1
From: Villa Park, Illinois
Default

Honestly I don't think you will have a problem getting into the 10s with your setup. I'm hoping to get into the 10s when I head back up to Great Lakes. My car is full weight and so am I lol. I would say head up on slick night (Thursday) for some decent track prep.
Reply
Old Jun 29, 2015 | 09:54 PM
  #12  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by blackLS1m6
Honestly I don't think you will have a problem getting into the 10s with your setup. I'm hoping to get into the 10s when I head back up to Great Lakes. My car is full weight and so am I lol. I would say head up on slick night (Thursday) for some decent track prep.
You think it shouldnt be a problem Even though I have stock suspension?that's really nice to hear. Haha.
Reply
Old Jun 29, 2015 | 10:08 PM
  #13  
blackLS1m6's Avatar
TECH Apprentice
iTrader: (14)
 
Joined: Jul 2008
Posts: 301
Likes: 1
From: Villa Park, Illinois
Default

Originally Posted by LS_86Cut442
You think it shouldnt be a problem Even though I have stock suspension?that's really nice to hear. Haha.
Is it completely stock? You'll at least need a decent set of shocks. An airbag will help you too. Power wise I think you'll have enough to get the job done.
Reply
Old Jun 30, 2015 | 06:44 AM
  #14  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by blackLS1m6
Is it completely stock? You'll at least need a decent set of shocks. An airbag will help you too. Power wise I think you'll have enough to get the job done.
Well the shocks that were on there Were air shocks. We took them off and put on gas adjust shocks. Other than that it's all stock.
Reply
Old Jun 30, 2015 | 09:23 AM
  #15  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by blackLS1m6
Is it completely stock? You'll at least need a decent set of shocks. An airbag will help you too. Power wise I think you'll have enough to get the job done.
I also just bought upper and lower adjustable Control arms so the suspension is no longer stock.
Reply
Old Jul 2, 2015 | 07:24 PM
  #16  
JaSSon's Avatar
10 Second Club
iTrader: (11)
 
Joined: Feb 2003
Posts: 1,437
Likes: 0
From: Bridge City, TX
Default

I ran 10:44 with a 346 with a lot less. mods in sig, x1 was a 230/227 cam
Reply
Old Jul 2, 2015 | 07:47 PM
  #17  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by JaSSon
I ran 10:44 with a 346 with a lot less. mods in sig, x1 was a 230/227 cam
So what's your estimate that I run with the setup I have?
Reply
Old Jul 4, 2015 | 03:48 AM
  #18  
Mazzenger's Avatar
TECH Enthusiast
iTrader: (5)
 
Joined: Apr 2002
Posts: 747
Likes: 4
From: Oklahoma
Default

The motor should make plenty to do it.
It all depends on your suspension and tires.
Reply
Old Jul 5, 2015 | 08:46 PM
  #19  
JaSSon's Avatar
10 Second Club
iTrader: (11)
 
Joined: Feb 2003
Posts: 1,437
Likes: 0
From: Bridge City, TX
Default

Originally Posted by Mazzenger
The motor should make plenty to do it.
It all depends on your suspension and tires.
What he said get it dialed right verter means a lot I went thru a few
Reply
Old Jul 6, 2015 | 08:20 AM
  #20  
LS_86Cut442's Avatar
Thread Starter
On The Tree
 
Joined: Jun 2015
Posts: 124
Likes: 1
From: chicago, illinois
Default

Originally Posted by JaSSon
What he said get it dialed right verter means a lot I went thru a few
It's not going to be a full out drag car. It's my daily driver and I want to be able to run 10s when I take it to the track. Qa1 adjustable uppers and qa1 lower control arms to go along with a qa1 sway bar rear tires are 255 50 15 mickey Thompson street radial
Reply



All times are GMT -5. The time now is 02:18 PM.

story-0
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-1
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-2
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-3
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-4
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE
story-5
Hennessey's New Supercharged Silverado ZR2 Has 700 HP

Slideshow: Hennessey has turned the Silverado ZR2 into a 700-hp off-road monster with supercharged V8 power and a limited production run.

By Verdad Gallardo | 2026-03-24 18:57:52


VIEW MORE
story-6
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes

Slideshow: A one-off sports car that looks like a vintage Italian exotic-but hides a C6 Corvette underneath-just sold for the price of a new mid-engine Corvette.

By Verdad Gallardo | 2026-03-23 18:53:41


VIEW MORE
story-7
Awesome K5 Blazer Restomod Comes With C7 Corvette Power

Slideshow: A heavily reworked 1972 K5 Blazer swaps its off-road roots for a low-slung street-focused build with modern V8 power.

By Verdad Gallardo | 2026-03-09 18:08:45


VIEW MORE
story-8
10 Camaros You Should Never Buy

Slideshow: There are thousands of used Camaros on the market but we think you should avoid these 10

By | 2026-02-17 17:09:30


VIEW MORE
story-9
10 LS Engine Myths That Refuse to Die

Slideshows: Which one of these myths do you believe?

By Verdad Gallardo | 2026-01-28 18:10:11


VIEW MORE