388” ls3 hits the rollers with a new Cam! *hp\L*
#1
10 Second Club
Thread Starter
388” ls3 hits the rollers with a new Cam! *hp\L*
Hit the rollers today. Same dyno. With a new Cam spec’d by darthv8r and ground on Cam motions low lash solid roller, and a couple other tricks. Ended up with 673 RWHP @ 7100 rpm and 539 RWTQ. Car pulls clean and will smack the 8000 rpm limiter with ease. I are pleased
#2
TECH Senior Member
Okay, just for clarification, is this a Donkey Dick cam or a Horse **** cam?? Inquiring minds gotta know....
#3
TECH Veteran
9 sec rwhp!!
The following users liked this post:
Jimbo1367 (08-14-2022)
Trending Topics
The following users liked this post:
Jimbo1367 (11-12-2022)
#13
10 Second Club
Thats good ****!
#14
7 Second Club
Nice work Hammer!
#18
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Agreed! This is one of the best builds I've seen on here. Serious power but still pretty much a street car. Curious what other plans you got. At some point the motor stronger than the chassis. And you're probably past that point.
And yes LLSR ftw. Like bringing a gun to a knife fight.
And yes LLSR ftw. Like bringing a gun to a knife fight.
#19
11 Second Club
iTrader: (9)
Agreed! This is one of the best builds I've seen on here. Serious power but still pretty much a street car. Curious what other plans you got. At some point the motor stronger than the chassis. And you're probably past that point.
And yes LLSR ftw. Like bringing a gun to a knife fight.
And yes LLSR ftw. Like bringing a gun to a knife fight.
#20
TECH Fanatic
Join Date: Aug 2009
Location: Coast of San Mateo County Between Pacifica & HMB
Posts: 1,827
Received 232 Likes
on
137 Posts
What blows me away even more is the street ability of
32* Overlap + Mid Length Runners + Light Clutch/Flywheel
being tuned with the 99-02 PCM.
Mad Tuning Skillz there!
Very few supposed "Pro Tuners" have ability or willingness
to tune such a combo!
32* Overlap + Mid Length Runners + Light Clutch/Flywheel
being tuned with the 99-02 PCM.
Mad Tuning Skillz there!
Very few supposed "Pro Tuners" have ability or willingness
to tune such a combo!