lawrenq

iTrader: (2)

I'm wrapping up the build on 6.2 build with l92 heads. The engine is bored to 4.070, with Mahle 2cc dome pistons and lunatti rods on a stock crank.

The heads have been shaved .010 and these are the specs on the cam from tsp 227/234 .629"/.615" 113LSA +3. I'm running a stock ls3 intake with a stock ls2 throttle body. The transmission is a gto t56 with an ls7 clutch with a ford 9 inch with 3.55 gears. This is going into my project 71 Chevelle son it'll be awhile before I get to actual dyno.

What do you guys think it'll make.

KW Baraka

iTrader: (7)

440hp / 420tq to the wheels.

KW

big hammer

99 Black Bird T/A

iTrader: (4)

What sort of exhaust? Stock exhaust, long tube headers or shorty headers?

lawrenq

iTrader: (2)

1 7/8 longtube headers 3 inch pypes street exhaust with x pipe

fst100

iTrader: (5)

467rwhp/444tq

fif_gen_powa

No reason it should not be up in the 480+ area

99 Black Bird T/A

iTrader: (4)

485/450

lawrenq

iTrader: (2)

Thanks for the responses, I'll be happy with 440rwhp and 420trq, but more is always better. It'll be a couple of months but after I get it to the dyno I'll post the results.

99 Black Bird T/A

iTrader: (4)

Have you had a chance to dyno the car?

lawrenq

iTrader: (2)

No not yet, engine is in car running but I'm at least two months away from getting the car road worthy.

Johnnystock

iTrader: (6)

455rwhp

jdwtx85

Updates???

cam

iTrader: (9)

437/425

AINT SKEERED

iTrader: (2)

I'd think 485/440

Tuskyz28

Interested in results...

RealQuick

iTrader: (14)