New Dyno Numbers
Thread Starter
On The Tree
Joined: Aug 2003
Posts: 169
Likes: 0
New Dyno Numbers Just got my car back from Norris.405rwhp. NLP/CNC stage 2 heads, Comp cam 226/230/113XE, Kooks headers with catted y,Vig 3200 converter, 3.73 gears, 160 thermostat, underdrive pulley. Man it sounds much meaner. 
Last edited by JAXFLSS; Aug 6, 2004 at 05:17 PM.
Thread Starter
On The Tree
Joined: Aug 2003
Posts: 169
Likes: 0
Originally Posted by mrr23
what was your numbers before the heads and cam? did you do all these mods at the same time? or was it just heads and cam this trip?
Mike
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Hey All,
Thanks for the kind words Mike. The 380 was untuned out of the box after adding all the mods. I did not get a chance to do a pre-dyno. On the 405 run I did attempt to lock the converter, but still had 300-350RPM slip and accounted that in the Vig not being broken in yet and maybe another 10HP there. A neat little car considering it was run through cats.
Later,
Mike
Thanks for the kind words Mike. The 380 was untuned out of the box after adding all the mods. I did not get a chance to do a pre-dyno. On the 405 run I did attempt to lock the converter, but still had 300-350RPM slip and accounted that in the Vig not being broken in yet and maybe another 10HP there. A neat little car considering it was run through cats.
Later,
Mike
Nice numbers. I wish more people had CnC heads on this board so we could see how good they are in comparision to other top porters.
Someone suggested them to me when I was looking for heads but I wanted to use a company that had more feedback so I could choose from who I felt was the best based on results not word of mouth.
Looks like your results are damn impressive with the cam you have being a stall A4 and congs on that. Have fun with her.
If you can dead hook on a good tire expect some low to mid 11's with that setup and 120+MPH.
Someone suggested them to me when I was looking for heads but I wanted to use a company that had more feedback so I could choose from who I felt was the best based on results not word of mouth.
Looks like your results are damn impressive with the cam you have being a stall A4 and congs on that. Have fun with her.
If you can dead hook on a good tire expect some low to mid 11's with that setup and 120+MPH.
Last edited by JZ'sTA; Aug 9, 2004 at 06:22 PM.
