Dyno of 99% bonestock 2002 WS.6
#1
11 Second Club
Thread Starter
Join Date: Feb 2002
Location: Norcal
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I dynoed my 2002 CE vert WS.6, A4 with a K&N air filter, with 4150 miles on the car and was pleasantly surprised.
First pull was 304/313 then 305/31x, 306/31x and 309 325, bypassing the airfilter. AF was pig rich.
First pull was 304/313 then 305/31x, 306/31x and 309 325, bypassing the airfilter. AF was pig rich.
Last edited by Spellbound; 06-12-2006 at 12:51 PM.
#5
11 Second Club
Thread Starter
Join Date: Feb 2002
Location: Norcal
Posts: 639
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's been my experience, I have an 01 WS.6 also and from attending several dyno days, that the 01's and 2's run that way from the factory. My first run was worse than the one that is posted. It was around 10.8/9 A/F. My stock 01 dyno, the A/F is about the same way. if I would've had my G-maf with me, I would have thown that on there to lean it out some. On my 01, along with a lid and K&N it was good for about 20 rwhp and it brought my A/F to around 12.5.