question...need to free up 15rwhp....

Reply Subscribe

Thread Tools

Search this Thread

Sep 28, 2004 | 05:16 PM

TNTramair

Thread Starter

11 Second Club

iTrader: (15)

Joined: Feb 2004

Posts: 2,743

Likes: 1

From: ne philly

question...need to free up 15rwhp....

k..here goes...i dynoed 385.5rwhp and 375rwtrq running 13.9-14.0 across the board...ive yet to get tuned but most were sayin i may lose some hp when the tune gets done....i hope not. in any case, what could i do to get 15 more rwhp...id like to achieve 400rwhp cam only. what can be done??

maf?
i dont wanna do electric water pump, too much dough.
cut-out?
any suggestions or opinions are appreciated...thanx.
btw, mods are in sig.

Sep 28, 2004 | 06:34 PM

Worm

TECH Resident

iTrader: (2)

Joined: Jan 2004

Posts: 788

Likes: 0

From: Tulsa, OK

14 is actually pretty lean. You could probably richen it up and give it some more timing. Add a cutout on the Y pipe and you would probably be where you want.

Sep 28, 2004 | 06:34 PM

Worm

TECH Resident

iTrader: (2)

Joined: Jan 2004

Posts: 788

Likes: 0

From: Tulsa, OK

What kinda filter you running? Might be a couple HP there and in the MAF screen if you still have it in.

Sep 28, 2004 | 06:56 PM

TNTramair

Thread Starter

11 Second Club

iTrader: (15)

Joined: Feb 2004

Posts: 2,743

Likes: 1

From: ne philly

k&n...and maf still has screens

Sep 28, 2004 | 07:20 PM

CHRISPY

TECH Senior Member

Joined: Nov 2001

Posts: 10,341

Likes: 1

You are WAY lean you have 10RWHP in tuning easily probably more depending on what your timing is looking like and what knock you are seeing.

Dont beat on it on the street with that lean AF.

Sep 29, 2004 | 07:46 AM

Ryan02SS

TECH Fanatic

iTrader: (3)

Joined: May 2003

Posts: 1,795

Likes: 0

From: Lake Anna, VA/ Fairmont, WV

Add a cutout before your muffler in the I pipe along with an LS1 Edit tune and you'll see an easy 15rwhp. I agree with Chris about that AF ratio and WOT street runs.