Hammer Cam/Stalled/Bolton's
#1
TECH Fanatic
Thread Starter
iTrader: (9)
Join Date: Nov 2003
Location: Ashland, KY
Posts: 1,371
Likes: 0
Received 0 Likes
on
0 Posts
Hammer Cam/Stalled/Bolton's
This was the best out of 8 pulls, on 18x9.5's, cutout open, stall unlocked, through an inertia dyno w/ 2300 pounds be putting against the car. The shop said these numbers are 3-5% low compared to a dynojet, so I guess I would hit around 370-375 rwhp if it was done on that kind of dyno. More than happy with the results! Like to think Alex Proctor and SR Racing!
#3
TECH Addict
iTrader: (5)
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Superflow give 8-11% higher numbers than a dyno jet since dyno jet has 3000-3200lbs inertia. There is a guy here in our area dyno'd a stock Z06 and got 388rwhp. When he went to a dynojet he got 352rwhp. I think u have valve float after 6200rpm or around 5900rpm actual rpm since u are running a higher stall. Did u see any knock when the car was on the dyno?
#5
TECH Addict
iTrader: (5)
Join Date: Mar 2002
Location: VA
Posts: 2,320
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BoneSS
There was some knock, but could it have been due to the stall? Thanks for the correction on the dyno!