New numbers.. but not happy...
Thread Starter
TECH Resident
Joined: May 2002
Posts: 829
Likes: 0
From: Fremont, CA
New numbers.. but not happy... I did 393rwhp/390rwtq NA and 511rwhp/606rwtq on a 100 shot.
Mods: ASA cam, SLP LT's (2 primaries badly damaged on the passenger header), ls6 intake, true duals, k&n fipk... the usual stuff. cant say im too impressed. I will be changing the cam, putting good headers on it, and new exhaust, hoping to hit 425+. The nitrous numbers were sweet though.
Mods: ASA cam, SLP LT's (2 primaries badly damaged on the passenger header), ls6 intake, true duals, k&n fipk... the usual stuff. cant say im too impressed. I will be changing the cam, putting good headers on it, and new exhaust, hoping to hit 425+. The nitrous numbers were sweet though.
Thread Starter
TECH Resident
Joined: May 2002
Posts: 829
Likes: 0
From: Fremont, CA
Stock heads, M6, and its an NX MAF kit. 
I have a trex to put in shortly, with some harland sharp rockers, dynatech stepped headers, x pipe, and magnaflows... should be interesting.
I have a trex to put in shortly, with some harland sharp rockers, dynatech stepped headers, x pipe, and magnaflows... should be interesting.
Originally Posted by RTCamaroSS
Stock heads, M6, and its an NX MAF kit.
I have a trex to put in shortly, with some harland sharp rockers, dynatech stepped headers, x pipe, and magnaflows... should be interesting.
I have a trex to put in shortly, with some harland sharp rockers, dynatech stepped headers, x pipe, and magnaflows... should be interesting.
Trending Topics
Don't see why you're not happy. Those are great numbers for a cam only car. Some heads and cam cars don't even get that. Plus, you have a messed up header.
I would not be dissapointed at all. Nice #'s.
I would not be dissapointed at all. Nice #'s.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
TECH Resident
Joined: May 2002
Posts: 829
Likes: 0
From: Fremont, CA
Well i guess i should reword that... im happy with the numbers for the setup.. but not happy with the power, i want more So ive got a pile of parts at the shop ready to go in.
I should take a picture of the header... one primary is literally smashed to a point where its restricting 50% of the flow. The other about 35%... So i guess when i put on the new headers, dynatech 1 3/4 to 1 7/8 stepped, i should see a good gain alone. Then the trex, rockers, and new exhaust all the way back. Im hoping for 425rwhp... unrealistic?
So ive got a pile of parts at the shop ready to go in. I should take a picture of the header... one primary is literally smashed to a point where its restricting 50% of the flow. The other about 35%... So i guess when i put on the new headers, dynatech 1 3/4 to 1 7/8 stepped, i should see a good gain alone. Then the trex, rockers, and new exhaust all the way back. Im hoping for 425rwhp... unrealistic?
Originally Posted by JS
The tq is broad and flat..
Very good # if u ask me....
Very good # if u ask me....
