jlashley2001ss

iTrader: (5)

mods below. tuned and this is the results:

max power=325.1
max torque=397.6


is this good?

HavATampa

iTrader: (49)

That's just not right. Did you mistype your torque numbers?

jlashley2001ss

iTrader: (5)

nope i seen it on the dyno myself and the sheet is staring me in the face as i type.

FormulaFire

iTrader: (20)

I have typically seen a little more hp from those mods, But that torque is crazy if it is right..

jlashley2001ss

iTrader: (5)

i think it being an A4 robs me of hp.

M6HuggerSS

thats correct... but they look good to me....

mrr23

iTrader: (3)

amazing what a torque converter can do. unless he's looking at the peak number results and there's a torque spike at the beggining of the run which will give you a false peak number. like this one i had. gotta love the false spike.

jlashley2001ss

iTrader: (5)

its nota peak like that

jlashley2001ss

iTrader: (5)

i dont know if this hurt the horsepower but its like 85 degrees, dew point like 65 and humid as a **** in NC.

JZ'sTA

iTrader: (23)

Well if it isn't a spike then the dyno is reading torque incorrectly.
No way the car acturally makes that torque with those mods.
The HP seems very normal.

jlashley2001ss

iTrader: (5)

i mean there is a peak at first then it falls off. its not a crazy peak like above but there is a peak

00formLs1

I dynoed last week with similar mods with 95 degree weather and got the numbers in my sig, on my first run i made 344hp and 376tq, ur tq number is freakin high, congrats

jlashley2001ss

iTrader: (5)

man he is makin 344 hp on a 2000 model ls1 (ls1 intake) how is he makin that much more than me? man those bellows are the ****

00formLs1

acctually its 348.6 and 369.9 look in sig. i don't know i think my car is just a freak. when i was stock i would pull every other f-boby with mods by 2 or more cars. i pulled on a coulpe of c5 and c4 with just a lid and BELLOW. I wish i would have dynoed when i was stock but didn't know my town had a dyno till last month.
am getting a ls6 intake, 125-150 shot and finally a tune in august so i should have some more numbers then.

PunkNPonys

iTrader: (2)

I would like to see dyno sheets on both these numbers. I think 325rwhp is right on line but the torque is off, it had to have been a spike. Are those locked or unlocked numbers? Well congrats on the numbers for both of you.

00formLs1

don't know how to post pic, gonna get with a friend who knows how some time this week. how do u lock a stock converter?
i did my run in 3rd gear.
i'll try and have my graph up by thursday.

jlashley2001ss

iTrader: (5)

yeah he locked it on the last pull on the dyno. i think the most he got out of it unlocked was 317rwhp and 385tq

BlueSix

At what RPM are you getting this 397 torque number?

jlashley2001ss

iTrader: (5)

3200rpm

DevonsZ

iTrader: (20)

00formLS1 do you still have the stock stall?