Dyno'd today, does this seem right?
I have a lid, LT headers, ORY, and a 3400 stall converter.
The car made 322.31hp@5750 rpm and 326.64 ft-lbs @4750 rpm.
A friend with a 98 Corvette with the same mods except the converter made 320
today so I am assuming this is about right?
Also my A/F was 12.10:1 to 12.3:1 from 5000 rpm up. Is this a little on the rich side, where should the A/F be ?
convertor locked?
a/f should be near 13:1
thanks

