Another Guess My Dyno Thread:

Reply Subscribe

Thread Tools

Search this Thread

Jan 25, 2006 | 01:07 PM

TINKRD

Thread Starter

TECH Fanatic

iTrader: (27)

Joined: May 2004

Posts: 1,597

Likes: 0

From: DFW

Another Guess My Dyno Thread:

Setup:

Forged 346 (Diamond Psitons 3.905 Bore, Crower Rods)

TEA 5.3L Stage 1.5 Heads (2.02int/1.55 exh)
Milled .15thousandths

TSP's MS3 Cam

ASP UD, Pacesetter LT's, Custom TD's, LS6 Intake, Shaner S3 TB

Once i get my income tax return a FAST 90/NW90 will be added along with a SD tune.

All this will go through a M6, Moser 12 bolt, 4.10 gears.

Add a TNT 150 shot on top of that.

Jan 25, 2006 | 01:13 PM

slow trap

TECH Addict

iTrader: (22)

Joined: Sep 2004

Posts: 2,639

Likes: 0

From: tennessee

i'll say 450 rw before the 90/90 then 465-470.

Jan 25, 2006 | 01:20 PM

NOSjohn

Restricted User

iTrader: (9)

Joined: Apr 2004

Posts: 2,692

Likes: 0

Really, a decent rule of thumb is 1.2 - 1.3 hp per cubic inch. It all depends on matched parts and the tune. Otherwise, guessing is just that...a guess.

Jan 25, 2006 | 01:21 PM

TINKRD

Thread Starter

TECH Fanatic

iTrader: (27)

Joined: May 2004

Posts: 1,597

Likes: 0

From: DFW

well i researched and couldnt find ANYONE w/ the exact H/C setup. I found other people running a smaller cam w/ those heads and they were between 420-450

Jan 25, 2006 | 05:07 PM

Y2kforgedSS

TECH Enthusiast

Joined: Dec 2003

Posts: 647

Likes: 0

From: Amarillo Texas

430-440rwhp before the 90/90.

Jan 25, 2006 | 05:48 PM

TINKRD

Thread Starter

TECH Fanatic

iTrader: (27)

Joined: May 2004

Posts: 1,597

Likes: 0

From: DFW

a lil reassuring. I was just want 420 before the FAST90/90. I'll update the thread in a few days w/ #'s.

Jan 25, 2006 | 05:52 PM

slow trap

TECH Addict

iTrader: (22)

Joined: Sep 2004

Posts: 2,639

Likes: 0

From: tennessee

i got 436 rw through the exhaust and i'm sure with some more fine tuning 445 is possible and i just have a scruffy 228/228.the ms3 should be good for atleast 20-25 more rw.