CRAZY dyno numbers
CRAZY dyno numbers Just had my TR224/224 114 cam dynoed. We did 2 pulls on a Mustang dyno and both sets of numbers are corrected. First pull was 399 HP & 397 TQ, 2nd set was 411 & 406. I am guessing that these numbers aren't correct, me and the tuner just looked at each other and laughed. Mods in sig
Originally Posted by vodas00ss
Are they sae corrected? Do ya got a graph you can post?
Yes they are corrected, having family dinner right now I will post pics up tonight or tomorrow
i have the thunder 224/224-112 and dynoed a few days ago on a dynojet and have similar results. full boltons with a ls6 intake, but the catch is i have a ford 9 inch with 4.11's and put down 384.82 rwhp and 383.79 rwtq. on a 120 shot power went to 502.23 rwhp and 521.25 rwtq.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Originally Posted by 02 Camaro SS
Wow those are sick numbers especially on a Mustang dyno.
Yeah that's why I am having a tough time believing them. On the same dyno with just lid, 3 inch Y, FRA & cutout I put down 332 HP and 340 TQ....maybe my car just loves that dyno??
TECH Apprentice
Joined: Sep 2005
Posts: 339
Likes: 0
Originally Posted by hurley711
Yeah that's why I am having a tough time believing them. On the same dyno with just lid, 3 inch Y, FRA & cutout I put down 332 HP and 340 TQ....maybe my car just loves that dyno??
Those would be impressive #'s on a dyno jet! They might wanna check their dyno or you could go redyno at a dyno jet and see what kind of #'s you're really putting down...
10 Second Club
Joined: Aug 2004
Posts: 328
Likes: 0
From: Houston
Originally Posted by Ksett
You should take your car to a Dynojet to get accurate numbers. There's something wrong with that Dyno. It's impossible to gain 79 rwhp from a cam and headers!
TECH Apprentice
Joined: Sep 2005
Posts: 339
Likes: 0
Originally Posted by TexasLT4
That's total BS a good tuner with a decent sized cam and LT's can pull out that much... My cam and MAC mids and my tuner (a good friend of mine) pulled out 68rwhp on a baby cam... it's smaller than the TR224
Remember also it was cam, headers along with a LS6 manifold and ported TB and also the tune which was pretty much right on 13.13-13.0. I figure the manifold and ported TB were worth and at least extra 12-18 at the wheels also.
Originally Posted by Ksett
You should take your car to a Dynojet to get accurate numbers. There's something wrong with that Dyno. It's impossible to gain 79 rwhp from a cam and headers!
12 Second Club
Joined: Aug 2005
Posts: 109
Likes: 0
From: St. Peters
I have the same cam untuned with 4.10's in a moser and put down 405 horse and 398 torque, there is a few videos in the multimedia exchange under my name. check them out. I was also on a dyno jet
12 Second Club
Joined: Aug 2005
Posts: 109
Likes: 0
From: St. Peters
Originally Posted by GuesDog
scared the crap out of the camera man !! nice vid, great numbers 
