can you guys post up your 408 results/setups here?
#181
12 Second Club
iTrader: (13)
Join Date: Feb 2005
Location: Gateway International Raceway
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
HKE 408
Greg Good Ported L92 Heads
GMPP Carb Intake (unported)
TH400 w/ Nitrous stall
244/248 Cam
Ford 9 inch w/ Spool
TT2 Wheels and 28 tall tires
Car put down 455 uncorrected..... ran a 7.9 on motor
Fixed the tune and ran 7.6 on motor with the nitrous stall.
I am sure it was doing right around 475-480 corrected after the maf tune.
Greg Good Ported L92 Heads
GMPP Carb Intake (unported)
TH400 w/ Nitrous stall
244/248 Cam
Ford 9 inch w/ Spool
TT2 Wheels and 28 tall tires
Car put down 455 uncorrected..... ran a 7.9 on motor
Fixed the tune and ran 7.6 on motor with the nitrous stall.
I am sure it was doing right around 475-480 corrected after the maf tune.
I don't want to start anything or sound like a jerk...but my AFR 205s and 224/224 .563/.563 114 cam did 7.86 @ 91. The car was never on a dyno with this set up but did 8.0 @ 89 with 392/381.
What was your MPH? You must not 60' very well and have a strong trap speed. I think your setup has more in it, what tire were you running, suspension? Fill me in.
#182
10 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
Is that 7.9 on motor in the 1/8th?
I don't want to start anything or sound like a jerk...but my AFR 205s and 224/224 .563/.563 114 cam did 7.86 @ 91. The car was never on a dyno with this set up but did 8.0 @ 89 with 392/381.
What was your MPH? You must not 60' very well and have a strong trap speed. I think your setup has more in it, what tire were you running, suspension? Fill me in.
I don't want to start anything or sound like a jerk...but my AFR 205s and 224/224 .563/.563 114 cam did 7.86 @ 91. The car was never on a dyno with this set up but did 8.0 @ 89 with 392/381.
What was your MPH? You must not 60' very well and have a strong trap speed. I think your setup has more in it, what tire were you running, suspension? Fill me in.
7.6 @ 94.5mph with a 1.7 60ft on the same tires after the maf tune.
#185
TECH Regular
iTrader: (15)
Join Date: Feb 2005
Location: East Freetown, MA
Posts: 458
Likes: 0
Received 0 Likes
on
0 Posts
To all of you guys making these 480+ HP numbers, at what RPM does your HP and torque peak?
What's the average torque from say 2500 rpm to 6000? Same for HP?
Seems to me everyone is getting caught up in the numbers, but no one has asked the important questions when it comes to a true street car.... I'm building a 408 motor, but I want it to be truely streetable and driveable. A motor that makes power from 5600-6500 isn't going to do me any good!
What's the average torque from say 2500 rpm to 6000? Same for HP?
Seems to me everyone is getting caught up in the numbers, but no one has asked the important questions when it comes to a true street car.... I'm building a 408 motor, but I want it to be truely streetable and driveable. A motor that makes power from 5600-6500 isn't going to do me any good!
#187
10 Second Club
iTrader: (5)
Join Date: Jul 2005
Location: by my computer
Posts: 2,958
Likes: 0
Received 0 Likes
on
0 Posts
car ran a 6.48 at 108 on a 200 shot out the hole... I am not worried about the na numbers...... it needs a better converter to go faster on motor.... thirty two hundred stall on motor aint cuttin it!
#188
12 Second Club
iTrader: (13)
Join Date: Feb 2005
Location: Gateway International Raceway
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
That is haulin'...but I still think there is more in there NA. You can get it to 7.5 or 7.4 with a better 60', good numbers though. And I think you are right...more stall and you will be low, low 7's.
Last edited by ExceSSive; 11-13-2007 at 07:27 PM.
#190
12 Second Club
iTrader: (13)
Join Date: Feb 2005
Location: Gateway International Raceway
Posts: 1,575
Likes: 0
Received 1 Like
on
1 Post
Maybe somebody should go through and put everybody's numbers in one new thread and eliminate all the extraneous info from this thread.
I think after 10 pages of this, the point in this thread has been lost.
I think after 10 pages of this, the point in this thread has been lost.
#192
I tuned a 408 a few weeks back, still had 241 casting heads on it, but a very nice sized cam (don't know the specs). TH400, 3.90:1 gear, all the other goodies. Only made 435rwhp on our Mustang dyno, but ran an 10.30 @130 two weeks ago with a 1.59 60'. There's more in it once the suspension is dialed in. Dyno numbers really don't mean much for race cars.
I'll have numbers for one of our 408's with Trickflow 225cc heads, and one of our custom cams in a 99 A4 Vette in about two weeks. Motor's here, just waiting to get a lift free.
I'll have numbers for one of our 408's with Trickflow 225cc heads, and one of our custom cams in a 99 A4 Vette in about two weeks. Motor's here, just waiting to get a lift free.
#194
TECH Addict
iTrader: (1)
Join Date: Aug 2002
Location: Lake Jackson,TX
Posts: 2,879
Likes: 0
Received 0 Likes
on
0 Posts
Iron 408
11.2 comp
250 250 640 640 113
ET 245`s
526rwhp 482rwtq
A4, 12-bolt 3.73 gears
Set-up for nitrous 200 shot
Weight 3800lbs with me in it (me 210)
HKE built the motor
G-Force install and tune
Full inter/ A/C and all. Pure Street Car
With my stock bottom H/C and 100 shot I ran 6.9 1/8 at 99.8mph. I feel I make the same N/A power so I`m hoping mid 10`s N/A and low 10`s on my 200 shot!
11.2 comp
250 250 640 640 113
ET 245`s
526rwhp 482rwtq
A4, 12-bolt 3.73 gears
Set-up for nitrous 200 shot
Weight 3800lbs with me in it (me 210)
HKE built the motor
G-Force install and tune
Full inter/ A/C and all. Pure Street Car
With my stock bottom H/C and 100 shot I ran 6.9 1/8 at 99.8mph. I feel I make the same N/A power so I`m hoping mid 10`s N/A and low 10`s on my 200 shot!
#196
11 Second Club
iTrader: (4)
Join Date: Jul 2005
Location: Ogden, Utah
Posts: 1,294
Likes: 0
Received 0 Likes
on
0 Posts
Here is what my setup did on a stock intake manfiold, stock TB, shitty *** headers, 19" chrome heavy wheels, and 5 mushroomed valves
bigger numbers were on a 150 hit, the dyno lost signal for a second, thats what the huge drop spike is
(we sprayed after peak torque as it was lighting up the tires on the dyno)
bigger numbers were on a 150 hit, the dyno lost signal for a second, thats what the huge drop spike is
(we sprayed after peak torque as it was lighting up the tires on the dyno)
#197
just got my iron 408 started in the new NA setup.
PRC 260 LS3 heads
custom camshaft from VCM 250/263 0.629 0.626 111 LSA
port matched holley hi ram
60LB siemens injectors.
1 7/8 stainless headers
right around 13:1 compression
will run it on pump 98 to start with then go to e85 when i can get a good reliable supply.
yet to go on dyno, will post numbers when it comes off the rollers...
PRC 260 LS3 heads
custom camshaft from VCM 250/263 0.629 0.626 111 LSA
port matched holley hi ram
60LB siemens injectors.
1 7/8 stainless headers
right around 13:1 compression
will run it on pump 98 to start with then go to e85 when i can get a good reliable supply.
yet to go on dyno, will post numbers when it comes off the rollers...