Rons 5.3

iTrader: (7)

Dynoed today after installing Comp. Cams 238/240 605/609 on a 112 lsa, longtubes, ory (no cats), valve springs, push rods, Ls-6 oil pump, tune....ended up with 365 rwhp and 350 rwtq on a mustang dyno. Car is an 02 SS with an A4.....Good? Bad? average? Thanks for any input, Ron

foff667

iTrader: (2)

locked or unlocked?

foff667

iTrader: (2)

either way though...big cam only setup on a mustang dyno those arent horrible numbers. See what it runs at the track then make your decision.

Rons 5.3

iTrader: (7)

Hell, I didnt ask....does it say on the dyno sheet anywhere? this was through the stock cat back too....

bad95killer

It seems to be locked to me & As foff667 stated above track numbers talk since you're running an A4 buddy

peace

STRIPSTAR

iTrader: (4)

Seems good for an auto on a Mustang dyno.

Rons 5.3

iTrader: (7)

lol, your right! Next step is a stall....then possibly gears. That was also at 6250 rpms, wonder if i set the shift points higher if I would get anymore up top? Ron

98Grnz28

iTrader: (7)

Not bad figured it would be a little higher. I would take it to the track to see what she will do.

ABA383

iTrader: (1)

Yeah, the Mustang dyno will humble you...As long as the tune is right, just hit the track and see what the track says...Dynos are good tuning tools..but don't get hung up on the numbers...I would think that a cam that size would like more rpm, though...

--Alan

Rons 5.3

iTrader: (7)

thanks for the encouragement guys, I am looking forward to taking it to the track tomorrow night.....I'll post the numbers when I get them. Thanks, Ron