LS6 cam results
Thread Starter
On The Tree
Joined: Jul 2002
Posts: 109
Likes: 0
From: Edmonton, Alberta
LS6 cam results Six-speed, stock rear end, street tires inflated to 32 PSI
Powertrain mods:
'02 LS6 cam, Absolute Speed stage 2 heads, FAST 78mm intake, stock TB, Direct-Flo lid, descreened MAF, Jet-Hot Hookers, March pulleys, B&B Triflo exhaust.
392 HP, and 381 TQ, dyno was to 6200, but engine pulls strong to 6800, peak at around 5800.
AFR was consistent at 13.5:1, timing was set to 28 degrees at the top. I'm not going to tune this combo as a 226/226 cam is going in over the winter.
Comments welcome, and thanks to Martin at AFI Performance in Edmonton for the dyno, if you're in the area, he's the guy to see!
Powertrain mods:
'02 LS6 cam, Absolute Speed stage 2 heads, FAST 78mm intake, stock TB, Direct-Flo lid, descreened MAF, Jet-Hot Hookers, March pulleys, B&B Triflo exhaust.
392 HP, and 381 TQ, dyno was to 6200, but engine pulls strong to 6800, peak at around 5800.
AFR was consistent at 13.5:1, timing was set to 28 degrees at the top. I'm not going to tune this combo as a 226/226 cam is going in over the winter.
Comments welcome, and thanks to Martin at AFI Performance in Edmonton for the dyno, if you're in the area, he's the guy to see!
