Horsepower Suggestions
Thread Starter
On The Tree
Joined: Aug 2006
Posts: 155
Likes: 0
Horsepower Suggestions finally i got everything in and now i'm Just curious to see how much HP and TQ you guys think i'll make. I'm hoping for 440 - 450 HP not sure on the TQ.
Here is my setup
SSRA intake
SLP LID
90MM NICK WILLIAMS
90MM FAST PORTED BY TONY MAMO
FAST FUEL RAIL
PRC 2.5 5.3L HEADS
TORQUER V3 CAMSHAFT 111LSA
HARLAND SHARP ROCKERS 1.7
7.400 HARDEND PUSHRODS
LS7 LIFTERS
LS7 CLUTCH
HAYS ALUMMINUIM FLYWHEEL
DUAL VALVE SPRINGS
QTP RACE HEADERS
QTP ORY PIPE
MAGNAFLOW CATBACK
NGK TR55 SPARK PLUGS
MSD PLUG WIRES
LS6 PORTED OIL PUMP
LS2 TIMING CHAIN
SLP UNDERDRIVE PULLEY
PRO 5.0 SHIFTER
I believe this sums it up except for the 12 bolt i'm saving for
Here is my setup
SSRA intake
SLP LID
90MM NICK WILLIAMS
90MM FAST PORTED BY TONY MAMO
FAST FUEL RAIL
PRC 2.5 5.3L HEADS
TORQUER V3 CAMSHAFT 111LSA
HARLAND SHARP ROCKERS 1.7
7.400 HARDEND PUSHRODS
LS7 LIFTERS
LS7 CLUTCH
HAYS ALUMMINUIM FLYWHEEL
DUAL VALVE SPRINGS
QTP RACE HEADERS
QTP ORY PIPE
MAGNAFLOW CATBACK
NGK TR55 SPARK PLUGS
MSD PLUG WIRES
LS6 PORTED OIL PUMP
LS2 TIMING CHAIN
SLP UNDERDRIVE PULLEY
PRO 5.0 SHIFTER
I believe this sums it up except for the 12 bolt i'm saving for
Thread Starter
On The Tree
Joined: Aug 2006
Posts: 155
Likes: 0
no milling of the heads, and the gasket is going to be the stock gasket unless someone can give me a good recommendation on another. I'm not sure which other (size) gaskets i can run on this setup all opinions are welcome
Last edited by onebadZ28; Apr 8, 2007 at 03:15 AM.
