408 L92 power estimates
Originally Posted by RGKSR
I'm not in California, but I am a little disappointed in my 402/L92 setup.
451 RWHP/414 RWTQ. I was hoping for about 460-480 RWTQ, but I'm still working on it. I'd love to see a better intake.
Bob K.
451 RWHP/414 RWTQ. I was hoping for about 460-480 RWTQ, but I'm still working on it. I'd love to see a better intake.
Bob K.
Yep, still working on it!
Originally Posted by SSilverSSurfer
he had a 408 with an A4 and stock rear and gears. are you still working on the tuning?
izzy
izzy
Bob K.
Originally Posted by RGKSR
I'm getting the heads milled a little more and rechecking the coil bind on the springs.
Bob K.
Bob K.
Current Compression & Tuning
Originally Posted by SSilverSSurfer
what kind of compression you sitting at right now? still using the MAF or speed density?
My compression is 10.7 and I'm using a Z06 MAF. I getting the heads milled a little more and going with .041 gaskets.
Bob K.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
Originally Posted by RGKSR
SSilverSSurfer,
My compression is 10.7 and I'm using a Z06 MAF. I getting the heads milled a little more and going with .041 gaskets.
Bob K.
My compression is 10.7 and I'm using a Z06 MAF. I getting the heads milled a little more and going with .041 gaskets.
Bob K.
How far out of the hole are your pistons?
