565rwhp 504rwtq - LS7 C5 Z06 - all motor.
#24
Originally Posted by koolrayz
Good luck with those valve springs. LME put them in my last engine. Only a .635 lift cam and they broke with 1200 miles on them
#26
Originally Posted by NiceTry
I believe that you have Comp 921's on your heads if i am not mistaken....
Last edited by RC45; 08-12-2007 at 11:45 PM.
#27
Originally Posted by Damian
That video was beyond gay but will do a great job pissing off the exotic owners.
Nice #'s.
Nice #'s.
You've produced many videos I take it then? Hopefully none of them are "gay" - what ever that means?
I didnt see any overtly homosexual references or large displays of rainbows... but then again, what appeals to some is completly lost on others.
Oh well, there's no pleasing all the people all the time.
#28
Originally Posted by RC45
Thats odd.. because I asked that we not run the 921's and paid for Ferreas... unless you pocketed the Ferreas for yourself and shoved 921's in while I wasn't looking...
#29
Ferrea has a relatively new LS1/7 spring (last year or so) that Ferrea rates good to .700" lift capable. #S10061(?) but call them to verify #. They are more expensive than the Comp Cam 921's and installs @ 1.750"/ 155lb.
I bought a set for my LS7 cam setup but reconsidered and reduced the lift and high spring pressure when the stock LS7 rocker arms showed problems handling it. 921's are rated to .650" lift.
I bought a set for my LS7 cam setup but reconsidered and reduced the lift and high spring pressure when the stock LS7 rocker arms showed problems handling it. 921's are rated to .650" lift.
#31
Originally Posted by gtovan
Ferrea has a relatively new LS1/7 spring (last year or so) that Ferrea rates good to .700" lift capable. #S10061(?) but call them to verify #. They are more expensive than the Comp Cam 921's and installs @ 1.750"/ 155lb.
I bought a set for my LS7 cam setup but reconsidered and reduced the lift and high spring pressure when the stock LS7 rocker arms showed problems handling it. 921's are rated to .650" lift.
I bought a set for my LS7 cam setup but reconsidered and reduced the lift and high spring pressure when the stock LS7 rocker arms showed problems handling it. 921's are rated to .650" lift.
Last edited by RC45; 08-13-2007 at 09:05 PM.