Dyno Results

Reply Subscribe

Thread Tools

Search this Thread

Oct 10, 2007 | 04:08 PM

bigbill1

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2004

Posts: 37

Likes: 0

Dyno Results

I recently had my 9inch installed w/ 370 gears, spool, 35 spline axles. I also added adj lower control arms, sub frame connectors, adjustable torque arm, wolfe sway bar, adj panard bar. Before the mods the car dynoed at 421hp 390tq. Dyoned after the install 398hp 380tq! is that normal for that big of a loss? i was wondering should i change my ls6 intake to a fast intake and NW throttle bottle. Let me know what you think. BTW the car is a 2000 camaro ss 6 spd

Oct 10, 2007 | 04:43 PM

NVR KNO

TECH Enthusiast

Joined: Apr 2005

Posts: 678

Likes: 0

Yes it is.... My 12 bolt ate up 24hp and 20tq.... I have 3.73 gears and 35 spline axles as well.... But I will take that loss for peace of mind when I go to the track and launch the hell out of my car and dont worry about the rear end.

Oct 10, 2007 | 04:44 PM

NVR KNO

TECH Enthusiast

Joined: Apr 2005

Posts: 678

Likes: 0

If you change the ls6 intake to the FAST, you should see a pretty good gain....

Oct 10, 2007 | 04:54 PM

bigbill1

Thread Starter

Teching In

iTrader: (1)

Joined: Jun 2004

Posts: 37

Likes: 0

thanks, i was feeling a lil down! how much hp/tq should i see with the fast intake and nw throttle body?

Oct 10, 2007 | 05:03 PM

Camaro01SS4life

TECH Apprentice

iTrader: (4)

Joined: Feb 2002

Posts: 364

Likes: 0

From: San Jose

Typical loss for a 9 inch swap and gear change...Is this a H/C setup?..

Kev

Oct 10, 2007 | 05:07 PM

Camaro01SS4life

TECH Apprentice

iTrader: (4)

Joined: Feb 2002

Posts: 364

Likes: 0

From: San Jose

Quote:

Originally Posted by bigbill1

thanks, i was feeling a lil down! how much hp/tq should i see with the fast intake and nw throttle body?

Depends on if its ported or not...If its ported look around a 20HP gain and a little less for TQ...There are a lot of threads about FAST gains...

Kev