Made a quick dyno video
http://www.gonicd.com/videos/nicdyno16psi.wmv
Last edited by NicD; Jan 30, 2008 at 06:25 PM.
Trending Topics
The Best V8 Stories One Small Block at Time
I will probably hit you up about some tuning tricks as I plan to use HPT this time.
The heads are just out of the box AFR 225, no additional porting.
It has forged rods and pistons with good hardware in the bottom end.
It's not running with the MAF, you must have seen an old picture of it somewhere as it started out way back in the day with the MAF. It is greatly exceeding that at this point and while I have done it before at this level I wanted to get the best control of it with a 2/3 bar OS.
It runs basically like stock until you put your foot into it.

I believe the first audio clip is fear factory and the end one is unearth.
Last edited by NicD; Feb 1, 2008 at 10:38 AM.








