Numbers Tomorrow, any guesses?
Numbers Tomorrow, any guesses? I will be dyno'ing on a dynojet tomorrow making 3 pulls. One on motor and two on spray. Anyone want to predict numbers?
Humidity should be fairly low, temps in the low 50's - 60* at the time.
Mods include:
Full bolt'ons -minus water pump, and UD pulley
Custom true duals dumped pre-axle with cherrybomb single chambers
Comp Cams 224/224 .581/.581 112LSA
Stock 10 bolt with GM 4.10's
Humidity should be fairly low, temps in the low 50's - 60* at the time.
Mods include:
Full bolt'ons -minus water pump, and UD pulley
Custom true duals dumped pre-axle with cherrybomb single chambers
Comp Cams 224/224 .581/.581 112LSA
Stock 10 bolt with GM 4.10's
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Run number 3 was a 3rd gear motor pull. The first time I dyno'ed my car (2 year ago) on a mustang dyno it made 330ish untuned with a cam in 4th gear. The owner of the dyno told me to try a pull in 3rd gear to see if it makes a difference. It was 18hp higher in 3rd than it was in 4th. I tried a 3rd gear pull on motor to see if anything different would happen this time, and as you can see, lower.
For the first time on a dyno. I've been spraying this car for about a year.
It will break Mickey Tompson 275 Drag Radials loose from a 3rd gear roll at 50mph even though its progressed. Its pretty fun. It just made me more power hungry though.
It will break Mickey Tompson 275 Drag Radials loose from a 3rd gear roll at 50mph even though its progressed. Its pretty fun. It just made me more power hungry though.