Any 402 dyno's with small cams?
#2
This was/is a 402 with a 220/224 cam.... and AFR heads...
https://ls1tech.com/forums/showthrea...&highlight=402
https://ls1tech.com/forums/showthrea...&highlight=402
#4
TECH Enthusiast
Join Date: Apr 2007
Location: Charlotte, NC
Posts: 629
Likes: 0
Received 0 Likes
on
0 Posts
https://ls1tech.com/forums/showthrea...654&highlight=
about as close as you can get to what you're looking for.
about as close as you can get to what you're looking for.
#5
10 Second Club
iTrader: (7)
Join Date: Jun 2004
Location: Fayetteville, NC
Posts: 260
Likes: 0
Received 0 Likes
on
0 Posts
My results of the 402 + small cam build I did... https://ls1tech.com/forums/showthrea...284&highlight=
#6
One of my favorites with a little bigger cam:
https://ls1tech.com/forums/dynamometer-results-comparisons/803383-403-ls2-afr-205is-lays-down-550-rwhp.html
https://ls1tech.com/forums/dynamometer-results-comparisons/803383-403-ls2-afr-205is-lays-down-550-rwhp.html
#7
TECH Enthusiast
iTrader: (4)
Join Date: Jul 2005
Location: Texas, Europe, Iraq & Afghanistan
Posts: 531
Likes: 0
Received 1 Like
on
1 Post
Here's a link to a LS2-402 with a 226 - .585 - 112 camshaft on Patriot Performance Stage II heads.
https://ls1tech.com/forums/showthrea...highlight=dyno
I now have a large cam and heads shown in my signature and get great gas mileage with good power.
https://ls1tech.com/forums/showthrea...highlight=dyno
I now have a large cam and heads shown in my signature and get great gas mileage with good power.