Any guesses before I dyno???

Reply Subscribe

Thread Tools

Search this Thread

May 15, 2008 | 12:05 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

Any guesses before I dyno???

Just looking for some educated guesses really.....

stock 5.7 bottom end
233/239 .595/.605 112lsa
prc 2.5 5.3l heads
victor jr intake
speed demon 750 carb
hooker super comps 1 3/4" primaries 3" collectors w/3" dual exhaust
msd 6010 ignition box
continental 4k stall
th400
12 bolt w/4.10's and a spool
29" tall mt drag radials

also any ideas where I should start with the timing(not gonna run a map)

May 15, 2008 | 12:12 PM

jmmullin

On The Tree

iTrader: (2)

Joined: Mar 2008

Posts: 145

Likes: 1

From: Raleigh, NC

430 rwhp/ 398rwtq

May 15, 2008 | 12:18 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

I have never been to big on dyno numbers, but I have just been a little curious about this new carb setup. The car has after market suspension front and back and is lightened some(right at 3100lbs w/me) and I am really hoping to get it as close to 10's on motor at the strip as possible.

May 15, 2008 | 01:13 PM

allngn_c5

TECH Senior Member

iTrader: (3)

Joined: Apr 2006

Posts: 6,524

Likes: 1

From: Western Burbs of Detroit

Sounds like you got a good chance. Light car, lots of traction, and plenty of power. You should do it on motor.

May 15, 2008 | 05:33 PM

junior28570

10 Second Club

iTrader: (22)

Joined: Feb 2006

Posts: 536

Likes: 0

From: coastal N.C.

380hp / 370tq .. TH400, 4K stall, 4:10's & 29" tires will hold back the dyno #'s. Not to worry .. there's no time slips on the dyno

May 15, 2008 | 07:53 PM

jmmullin

On The Tree

iTrader: (2)

Joined: Mar 2008

Posts: 145

Likes: 1

From: Raleigh, NC

Quote:

Originally Posted by junior28570

380hp / 370tq .. TH400, 4K stall, 4:10's & 29" tires will hold back the dyno #'s. Not to worry .. there's no time slips on the dyno

OUCH! thats gonna make my guess look bad!!!

May 15, 2008 | 08:27 PM

SMAX

Thread Starter

11 Second Club

iTrader: (11)

Joined: Aug 2004

Posts: 453

Likes: 0

From: TULSA

my previous set up was the same cam, stock heads, efi, 4l60e w/3500 stall, 3.73 and 26" tall tires and that made 390rwhp and 380rwtq with the converter unlocked.