estimated dyno #'s for a4 LS1???
#1
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
estimated dyno #'s for a4 LS1???
Any estimates on what my 2002 a4 z28 would dyno w/ below mods and a Diablo tune I think its at least 300rwhp??? THX!!!
#6
TECH Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Western Burbs of Detroit
Posts: 6,524
Likes: 0
Received 1 Like
on
1 Post
My bone stock 2000 FRC put down 300 rwhp 300 rwtq. Talk about a shitty factory tune. Considering you have ls6 heads and a4 trans, I'd expect 305 rwhp 312 rwtq.
Hope you get more though, JMHO. Good luck.
Hope you get more though, JMHO. Good luck.
Trending Topics
#10
11 Second Club
iTrader: (32)
Join Date: Jan 2006
Location: Southaven, MS (near Memphis, TN)
Posts: 3,701
Likes: 0
Received 2 Likes
on
2 Posts
Does your car have 2.73 gears or 3.23?
Is it just me or is it impossible to get dyno numbers on a stock f-body with 2.73s? When my car was stock, and my friends, we've been on 3 different dynos....each one could not get an accurate reading in 3rd gear and had to dyno in 2nd. For some reason they all said something about maxing out the speed on the dyno... which would be pretty much impossible. As soon as I got 3.73s all was fine.
Is it just me or is it impossible to get dyno numbers on a stock f-body with 2.73s? When my car was stock, and my friends, we've been on 3 different dynos....each one could not get an accurate reading in 3rd gear and had to dyno in 2nd. For some reason they all said something about maxing out the speed on the dyno... which would be pretty much impossible. As soon as I got 3.73s all was fine.
#13
12 Second Club
Thread Starter
Join Date: Oct 2008
Location: OREGON
Posts: 258
Likes: 0
Received 0 Likes
on
0 Posts
Does your car have 2.73 gears or 3.23?
Is it just me or is it impossible to get dyno numbers on a stock f-body with 2.73s? When my car was stock, and my friends, we've been on 3 different dynos....each one could not get an accurate reading in 3rd gear and had to dyno in 2nd. For some reason they all said something about maxing out the speed on the dyno... which would be pretty much impossible. As soon as I got 3.73s all was fine.
Is it just me or is it impossible to get dyno numbers on a stock f-body with 2.73s? When my car was stock, and my friends, we've been on 3 different dynos....each one could not get an accurate reading in 3rd gear and had to dyno in 2nd. For some reason they all said something about maxing out the speed on the dyno... which would be pretty much impossible. As soon as I got 3.73s all was fine.