Milled/worked LS6 heads
01-06-2009, 10:13 AM
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Location: Shorewood, IL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Milled/worked LS6 heads Who's using milled/ported LS6 heads along with the usual bolt ons? Looking for dyno numbers with the above combo's and the search function isn't playing along. Thanks.
By the way, I'm looking at a cam in the 228/230 range.
Scatter'd
By the way, I'm looking at a cam in the 228/230 range.
Scatter'd
01-06-2009, 10:47 AM
#2
The dyno results section is for posting results. This section is for dyno guesses and feedback.
__________________
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
01-06-2009, 08:56 PM
#4
Teching In
Thread Starter
iTrader: (4)
Join Date: Jun 2007
Location: Shorewood, IL
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, sorry. Let me be a little clearer:
I'm looking for dyno results, for a stock cube LS1, with all the bolt ons, a mild cam (228/230) using milled LS6 heads. Any one out there using this setup?
I'm looking for dyno results, for a stock cube LS1, with all the bolt ons, a mild cam (228/230) using milled LS6 heads. Any one out there using this setup?
