how will i do?
03-03-2009, 10:11 AM
#1
TECH Fanatic
Thread Starter
iTrader: (2)
Join Date: Aug 2007
Location: Rhode Island
Posts: 1,474
Likes: 0
Received 0 Likes
on
0 Posts
how will i do? Hey guys just curious what you all think ill run with my new setup.. Car is a 98 with 98k on the clock, stock intake, stock heads, ported throttle body, custom cam .230/.236 .612/.607 on a 114, 3600 stall, 3.73 gears, longtubes with straight dials no crossover. Will have drag radials and weight reduction.. Around 3350 to 3400 pounds, car will be fully dyno and street tuned.
03-03-2009, 06:18 PM
#2
Launching!
iTrader: (5)
Join Date: Oct 2008
Location: eastern shore, VA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
i say at least in the 11's, depends on your launch, maybe high maybe mid. nice gear nice stall nice cam, nice tires. but heads and intake choke it up a little. so i say 11.80's, final answer.
03-04-2009, 10:30 PM
#4
Launching!
iTrader: (5)
Join Date: Oct 2008
Location: eastern shore, VA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
also if you have a decent speed shop near you, i have found that you can get a port and polish for a decent price, it wont flow like expensive aftermarket heads but it will improve and together with the ls6 intake and cam and headers you got a decent flowing motor. just my .02
p.s. i picked up my heads for 500$ and spent 500$ on port and polish so for about a grand i have some decent heads and spent about what one aftermarket head cost
p.s. i picked up my heads for 500$ and spent 500$ on port and polish so for about a grand i have some decent heads and spent about what one aftermarket head cost