98 camaro th350/9"
04-02-2009, 11:34 AM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Nov 2008
Location: Keezletown, Va
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
98 camaro th350/9" Hey guys,
I blew up my 84 Camaro drag car so the 9" and th350 is going into the 98 Z28. I was wondering what you guys predict it will run in the 1/8th. My mods will be.
stock internal Ls1
Pacesetter long tubes/ No cats/ Lm1/ Exhuast ends after resonator.
!EGR and !AIR
K&N Cold Air pack
Free Mods
HP Tuners
Th350 3600 Stall
9" Moser with 4.56 gears and full spool
Draglites. Skinnys up front. 28x10.5 MT Slicks in Rear
Edelbrock TA
QA1s up front/ Comp Eng in rear 50/50
BMR LCA and Reloc brackets
What do you think it will run the way it sits now and also what it would run with pretty large cam and ls6 intake. Thanks so much guys. 1/8th mile times only please.
I blew up my 84 Camaro drag car so the 9" and th350 is going into the 98 Z28. I was wondering what you guys predict it will run in the 1/8th. My mods will be.
stock internal Ls1
Pacesetter long tubes/ No cats/ Lm1/ Exhuast ends after resonator.
!EGR and !AIR
K&N Cold Air pack
Free Mods
HP Tuners
Th350 3600 Stall
9" Moser with 4.56 gears and full spool
Draglites. Skinnys up front. 28x10.5 MT Slicks in Rear
Edelbrock TA
QA1s up front/ Comp Eng in rear 50/50
BMR LCA and Reloc brackets
What do you think it will run the way it sits now and also what it would run with pretty large cam and ls6 intake. Thanks so much guys. 1/8th mile times only please.
Last edited by Relentls1; 04-02-2009 at 11:35 AM. Reason: added more
