Dyno Guesses & Bench Racing Forum Horsepower Estimates | Racing Scenarios

10's possible with these pieces added?

Thread Tools
 
Search this Thread
 
Old 09-13-2009, 09:48 AM
  #1  
11 Second Club
Thread Starter
iTrader: (24)
 
Intercooler2's Avatar
 
Join Date: Mar 2008
Location: North East, MD
Posts: 2,555
Likes: 0
Received 2 Likes on 2 Posts
Default 10's possible with these pieces added?

Well I'm just full bolt-ons right now and just ran a best of 12.0@113 MPH. Visit got cut short due to rain or next pass was 11.XX. The track had issues with their compressor and my 1-2 shift was 5900 instead of 6100. I fixed those but it rained I was leaving easier and only had a 1.70 60's instead of my usual 1.60's. I think 11.80 is there this Wed. On to the parts going in next weekend:

- Patriot Performance 2.05/1.60 243 heads
- Cometic gaskets to bump compression to 11:1
- 224/228 Comp Cam W/LS-7 lifters
- 42 lb injectors
- 92mm FAST port matched inlet opened to 96mm
- 96mm TB

It looks like hitting it with 100 shot. If you run 12.0 and hit a car with 100 shot what does it go?
Old 09-13-2009, 05:08 PM
  #2  
Moderator
iTrader: (15)
 
JayplaySS's Avatar
 
Join Date: Dec 2004
Location: Miami, OH
Posts: 4,616
Received 161 Likes on 99 Posts

Default

From what I have seen, a 100 shot is good for .8-.10 of a second and 8-10mph on your trap. Just a guide though so yes, it it possible to crack a 10.99 if you're turning 12.0's N/A.
Old 09-13-2009, 05:14 PM
  #3  
Teching In
 
oliphant14's Avatar
 
Join Date: Jun 2008
Location: amarillo
Posts: 21
Likes: 0
Received 0 Likes on 0 Posts
Default

with the right tune and hoping that you can hook up you can hit 10s good luck mods




All times are GMT -5. The time now is 11:45 PM.