How close will it be?
Thread Starter
TECH Enthusiast
Joined: Mar 2009
Posts: 522
Likes: 0
From: West Chester, PA
How close will it be? There is a guy talking a ton of **** about how ugly my 00 Z28 is and how bad he can beat me with his 87 mustang gt with a 5.sl0w.
He's running gt40x aluminum heads, e303 cam, full exhaust with tailpipes, and a powerdyne bd11a. 341 horsepower and 368 ft pounds of torque at the rear wheels.
I was wondering what the results would be if I were running 1-7/8th LT's TSP Rumbler-X and a street tune? I know his car is a lot lighter than mine, but he's not really running that much power for having heads and cam D:
He's running gt40x aluminum heads, e303 cam, full exhaust with tailpipes, and a powerdyne bd11a. 341 horsepower and 368 ft pounds of torque at the rear wheels.
I was wondering what the results would be if I were running 1-7/8th LT's TSP Rumbler-X and a street tune? I know his car is a lot lighter than mine, but he's not really running that much power for having heads and cam D:
There is a guy talking a ton of **** about how ugly my 00 Z28 is and how bad he can beat me with his 87 mustang gt with a 5.sl0w.
He's running gt40x aluminum heads, e303 cam, full exhaust with tailpipes, and a powerdyne bd11a. 341 horsepower and 368 ft pounds of torque at the rear wheels.
I was wondering what the results would be if I were running 1-7/8th LT's TSP Rumbler-X and a street tune? I know his car is a lot lighter than mine, but he's not really running that much power for having heads and cam D:
He's running gt40x aluminum heads, e303 cam, full exhaust with tailpipes, and a powerdyne bd11a. 341 horsepower and 368 ft pounds of torque at the rear wheels.
I was wondering what the results would be if I were running 1-7/8th LT's TSP Rumbler-X and a street tune? I know his car is a lot lighter than mine, but he's not really running that much power for having heads and cam D:
Thread Starter
TECH Enthusiast
Joined: Mar 2009
Posts: 522
Likes: 0
From: West Chester, PA
Doesnt matter if it is shitty numbers for a supercharger heads and cam.. All that matters is the power.. With that power/tq and you having the mods you do.. After taking in consideration weight... Plus I'm sure he will be on a sticky tire (not that the outcome would be different).. He is going to walk all over you.
He says it's a 12.30 car, but I'm going to assume that's what the dyno said the car can do given the perfect situation. I'm incredibly sure he's never been down to the track, and the car is on street tires. This is the only reason why I think I stand a chance against him.
He says it's a 12.30 car, but I'm going to assume that's what the dyno said the car can do given the perfect situation. I'm incredibly sure he's never been down to the track, and the car is on street tires. This is the only reason why I think I stand a chance against him.
Trending Topics
Thread Starter
TECH Enthusiast
Joined: Mar 2009
Posts: 522
Likes: 0
From: West Chester, PA
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Hes alot lighter and prob making 40-50+rwhp on you. Basicly your asking how will your sounds bone stock to me z28 do against a blown 5.0 thats alot lighter with heads and cam. He will make you look foolish. IF you had lts and true duals He will still make you look foolish but not as bad as before.
