6.0 Fbody estimate
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Nashville, TN
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
6.0 Fbody estimate
2000 Camaro SS - ~3400lbs
A4 - built 4l60e
Vig 3600 stall
3.23 gears
LQ4 - 10.8:1 compression
243 heads - slightly ported and polished - milled .030"
23x/24x .580/.590 112lsa
LS6 intake - portmatched
LT's/ORY through SLPII dumped
26x11.5 MT DR on stock suspension
what do ya'll think she'll pull off in a 1/8-1/4
A4 - built 4l60e
Vig 3600 stall
3.23 gears
LQ4 - 10.8:1 compression
243 heads - slightly ported and polished - milled .030"
23x/24x .580/.590 112lsa
LS6 intake - portmatched
LT's/ORY through SLPII dumped
26x11.5 MT DR on stock suspension
what do ya'll think she'll pull off in a 1/8-1/4
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: Dec 2007
Location: Nashville, TN
Posts: 104
Likes: 0
Received 0 Likes
on
0 Posts
yeah I've been thinking I'd have to.. I was hoping it'd be good to go. Being the pistons are dished quite a bit and that the lift on that cam isn't real high.
I haven't had the heads milled yet so I might just cut back on that a lil bit.
I haven't had the heads milled yet so I might just cut back on that a lil bit.