after cam ET guess??
07-20-2011 | 08:31 AM
#1
after cam ET guess?? ok so last fall i ran the following times with full bolt ons, full catless exhaust, 4.10's, heads milled, ported and polished, Intake mani ported and polished, TB ported, all porting done by Automotive Engine Systems in Chicago. I was running 245 all seasons on this pass, also the clutch was slipping when i would heat the tires lol. So basically everything in my sig besides the cam.
60' - 2.098
330'- 5.74
1/8 - 8.719
MPH- 82.96
1000'- 11.269
1/4 - 13.401
MPH - 106.19
Well over the winter i added the GM847 crane grind GM847: (234/242 .575/.595 112lsa) w/ 1.6RR's , with also a mail tune, and 30lb injectors, 275/ 315 Nt555's, Competition clutch and also a driver mod.
So what do you guys think i can run with the stuff i did over the winter?.
60' - 2.098
330'- 5.74
1/8 - 8.719
MPH- 82.96
1000'- 11.269
1/4 - 13.401
MPH - 106.19
Well over the winter i added the GM847 crane grind GM847: (234/242 .575/.595 112lsa) w/ 1.6RR's , with also a mail tune, and 30lb injectors, 275/ 315 Nt555's, Competition clutch and also a driver mod.
So what do you guys think i can run with the stuff i did over the winter?.
Last edited by 94ss06gxp; 07-20-2011 at 08:47 AM.
