Power Predictions on 408
02-01-2013, 12:46 AM
#21
Teching In
Thread Starter
Join Date: Apr 2011
Location: League City, Texas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Very nice number through a catted y pipie, nice torque curve too. What do the PRC 237cc heads flow? And what was your scr?
Last edited by mr slow; 04-04-2013 at 09:08 PM.
06-15-2013, 11:44 PM
#22
Teching In
Thread Starter
Join Date: Apr 2011
Location: League City, Texas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Okay so it ran out of fuel at 3850rpm(stock fuel pump) but I also forgot to mention to my tuner I was wanting a speed density tune and he was trying to tune it for maf. So that was probably the main issue but I needed a fuel pump anyway. But its no big deal, just my fault for not remembering to tell him. But it made 396 @ 3850rpm on an unloaded dyno. I will get the fuel pump put in and get it back to him probably Tuesday.
Last edited by mr slow; 06-17-2013 at 12:25 AM.
06-16-2013, 01:08 AM
#23
Teching In
Thread Starter
Join Date: Apr 2011
Location: League City, Texas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Does anyone have any dyno results making close to or around the same power at that rpm that you could post up, so maybe I can compare.
Last edited by mr slow; 06-17-2013 at 12:15 AM.
08-13-2013, 12:13 AM
#25
Teching In
Thread Starter
Join Date: Apr 2011
Location: League City, Texas
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Okay so it it made 523 at the wheels and I don't know the torque number because he said the cable ripped or something and they just haven't fixed it yet......
The good news it made 523 at the wheels on a dyno that is known to be pretty stingy around here, and the car was overheating(235°) because the fans were not coming on, gotta get that fixed.
The good news it made 523 at the wheels on a dyno that is known to be pretty stingy around here, and the car was overheating(235°) because the fans were not coming on, gotta get that fixed.
