What rwp will I be making??
08-04-2012, 06:50 PM
#1
Teching In
Thread Starter
iTrader: (6)
Join Date: Apr 2012
Location: Desoto, Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
What rwp will I be making?? Hey everyone I got a stock 99 Camaro SS with some mods and heads and cam combo I plan to run and want to know what kind of realistic rwp numbers I can expect and times in the 1/4. Here is the list of mods that are on my car and the cam and heads I plan to run.
On the car-
2in fiberglass pin on hood, Whisper Lid, Ported stock throttle body, SLP smooth bellow, 1 3/4 primaries into 3" collectors Stainless LT's, pacesetter ORY 3", 3" cat-back flomaster, and the basic mods like de-screened MAF, throttle body coolant bypass, and ram air mod.
Heads and Cam
243 mild ported heads
236/242 .580 .590Lift 112lsa
whith a good tune what can i expect? thanks
On the car-
2in fiberglass pin on hood, Whisper Lid, Ported stock throttle body, SLP smooth bellow, 1 3/4 primaries into 3" collectors Stainless LT's, pacesetter ORY 3", 3" cat-back flomaster, and the basic mods like de-screened MAF, throttle body coolant bypass, and ram air mod.
Heads and Cam
243 mild ported heads
236/242 .580 .590Lift 112lsa
whith a good tune what can i expect? thanks
08-04-2012, 08:28 PM
#3
Eh idk about that. Maybe 400 even I would guess. He's not getting the best heads he could for that cam. As far as 1/4 mile times no one here cab really tell you that man. Sure you can spout a list of mods and we can guess HP but without knowing how good a driver you are you could run a 14 your first pass. No one can tell you your time only one way to find out...
08-05-2012, 12:44 AM
#6
TECH Enthusiast
Join Date: Nov 2004
Location: Tampa FL
Posts: 714
Likes: 0
Received 0 Likes
on
0 Posts
The Ls6 intake is a good idea, but 420-430 hp aint gonna happen with the Flow-Disaster catback.
OP,
I would ditch that cat back for another one or have a muffler shop build you a set of 3 inch duals with an H or X pipethat dump at the axle.
OP,
I would ditch that cat back for another one or have a muffler shop build you a set of 3 inch duals with an H or X pipethat dump at the axle.
Trending Topics
08-05-2012, 04:05 AM
#8
Teching In
Thread Starter
iTrader: (6)
Join Date: Apr 2012
Location: Desoto, Texas
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Thanks guys for the feedback. I really hope to make at least 400 to the wheels. I was looking to switch to Borla catback or LM1, not sure which one. Oh and forgot to list my cutout after the Y on mods. Best time I ran at the 1/4 track was 13.2 @ 106 mph Stock. Im by no means the best driver but I would say I'm decent. Pulled a new 5.0 in 1/4 outshifted the driver haha. anyway just looking for opinions and I like to read the feedback helps me alot. Thanks.
