WITH THIS SET-UP...IN THE 1/8 MILE
04' 5.3 w/706 heads milled w/bowl work to get cr up to 10.1,,pac 1218 springs..tsp custom cam 214/224 @50*.112lca 559/566 lift..750 carb..RPM INTAKE...1.75 headers..350 trans..3000 stall...3.73 gears....89 lx mustang 3000LBS MIGHT ADD A 100 SHOT

 

8.1 @ 86

 

My s10 with the same engine combo except for I run a 390 carb went 8.06 @89. Vehicle weight same too. That's with et street 11.5"bias ply.
Hoping for mid 7s or 11s in the 1/4 next spring with the mods I'm doing over winter
Beaudacious

 

would it be better with 4.10 gears ???

 

wouldnt mess with gearing... get a bigger stall

 

i going w/a 3500 stall..