what kind of flywheel hp/tq to expect
#1
Teching In
Thread Starter
Join Date: Aug 2013
Location: kentucky
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
what kind of flywheel hp/tq to expect
im just curious and thought id ask, im still in the process of building the motor but its a ls1 0.10 over, flat top pistons, ms3 112 LSA cam, CNC 853 heads, ls7 lifters, yella terra 1.7 rockers, victor intake/msd6010 ( not sure what carb i will use) the headers will probably be 1 7/8 long tubes. again just curious on the kind of power to expect, this is my first ls build so any pointers would be awesome since im still in the process of putting it together
#3
Teching In
Thread Starter
Join Date: Aug 2013
Location: kentucky
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
ok cool well thats a good sign, im not sure what exactly the cr will be, the chambers on the heads are 66.7 so maybe 10.5:1 at the most i would think, but it will have a t56 behind, my goal is 425-450hp to the rear wheels, but thanks for the estimate
#4
TECH Senior Member
iTrader: (2)
Join Date: Aug 2012
Location: Howell & Fenton MI
Posts: 11,145
Likes: 0
Received 15 Likes
on
15 Posts
I'm sure I don't have to tell you this (but I will just in case lol) dynos can vary quite a bit, so don't put too much stock into numbers either. If it's built and tuned right it will be fast, and that's all that matters