camaroman08

iTrader: (5)

99 Camaro SS auto with 164k miles. Pacesetter longtube headers, tsp True duals dumped at the axle, Yank 4000SS converter, SLP Lid, LS6 intake, stock 853 heads (as far as I know they are stock), Tick Performance SNS Stage 3 Cam 235/243 .630/.610 111 LSA. Made 415/407 through the stock 10 bolt and 4l60e. Wondering what it might run in the 1/8 Mile, barring the trans and rear end don't explode. Also, it's on Nitto 555's (not the drag radial). With only full exhaust, it ran a best of 8.6. If I can somehow hook, or run it with drag radials, I'm hoping for Mid-High 7's at least. Does this seem reasonable?

98CayenneT/A

Absolutely reasonable.

With Lt's yank ss3600 and radials I ran 7.80 @ 88 mph on a 1.71 60'

Just a rough guess but I would guess around 7.5-7.6@92mph

Omega Doom

iTrader: (2)

my car made 414rwhp and 390rwtq with a RPM 5 cam 238-244 588-610 lift with full exhaust and a Yank 4k stall and stock everything else in a 2002 WS6 my car ran a 7.49@94 on a 100+ day in texas

camaroman08

iTrader: (5)

I'm assuming that is on drag radials?

Omega Doom

iTrader: (2)

yes MT 275/40/17s so I figure with your better TQ #s and less weight and in better air it should go quicker god luck to you sir

Omega Doom

iTrader: (2)

my guess would be something like a 7.3@95 unless you find some weld wheels and skinnies then maybe a 7.2@95 and that's with the stock 10 bolt and 3.23 gears you add 3.73s or 4.10s and maybe a BMR or UMI suspension pieces and some track time shoot for the 6.9@97 mph good luck and keep us posted